Abstract In this study, Cu-0.8 Cr-0.1 Zr alloy was prepared by vacuum horizontal continuous
casting method. The effect of different thermo-mechanical treatment processes on the …

The effect of severe plastic deformation by the conforming process of equal channel angular
extrusion (ECAE-Conform) followed by cold rolling on the microstructures developed in a Cu …

Microstructure evolution and properties of a Cu–Cr–Ag alloy during the continuous
manufacturing process were investigated in detail by scanning electron microscopy (SEM) …

This paper investigates the microstructural evolution and grain refinement kinetics of a
solution-treated Cu–0.1 Cr–0.06 Zr alloy during equal channel angular pressing (ECAP) at a …

The cold angular rolling process (CARP) is being developed as a continuous severe plastic
deformation technique, which can process metal sheets without any length limitations at …

Hot deformation behavior of an as-cast Cu–Ni–Si alloy with columnar grains in terms of flow
stress, constitutive equation, processing map, microstructure evolution, and dynamic …

A new Cu–2 wt% Ag–0.15 wt% La alloy composed of large-size Ag-rich primary phases was
processed into wire billets by successive drawing, annealing and continuous extrusion …

The microstructure evolution and properties of a Cu–Cr–Ag alloy during continuous
extrusion and an aging process were studied by Scanning Electron Microscope (SEM) and …

A Cu-0.43 Mg (wt.%) alloy was processed by equal channel angular pressing (ECAP) up to
eight passes via a processing route (Bc). The hardness distribution on the longitudinal and …

In this work, the microstructural evolution and common defects of Cu–Ag (0.075 wt.%) alloy
during continuous extrusion molding (CONFORM) were characterised and analyzed. The …