Due to its exceptional quality as a biomedical metal, stainless steel is often utilized to
produce a broad range of medical tools. The resistance of stainless steel to corrosion is a …

Particle-reinforced metal matrix composites (MMCs) produced using the laser powder bed
fusion (LPBF) technique have gained considerable attention because of their distinct …

Additively manufactured (AM) metal alloys normally exhibit very diverse grain size
distributions. The size measured by electron backscatter diffraction (EBSD) is generally …

Recent studies have confirmed that the high brittleness and property anisotropy of the
selective laser melting (SLM) fabricated H13 tool steel are attributed to the presence of …

Nitrogen outgassing and nitrogen pore formation are tricky problems inherent in the
fabrication/repair of high nitrogen steel (HNS). In the current research, HNS powder with a …

Damaged high nitrogen steel (HNS) plates were repaired by underwater laser direct metal
deposition (UDMD) technique at the ambient pressure of 0.3 MPa. Both experiments and …

The most significant challenges in the laser additive manufacturing of high-nitrogen steel are
nitrogen loss and nitrogen pores, which significantly impact the microstructure and …

Clarifying the effects of the atomization gases on the mechanical properties and their
interactions with scanning strategies is of vital importance in additively manufactured …

Silicon steel is a widely used soft magnetic material that requires different texture
components for different applications, typically classified as grain-oriented or non-oriented …

The additivation of conventional metal powders allows the expansion of the range of
materials and alloys suitable for powder bed fusion additive manufacturing of metals. The …