The application of additively manufactured (AM) stainless steel (SS) parts is rapidly
emerging in a broad spectrum of industries. Laser powder bed fusion (LPBF) and direct …

This study comparatively examines the impact of combined surface nanocrystallization
(SNC) and thermal oxidation (TO) treatments on the corrosion performance of AISI 321 …

Surface texturing, which depends on the formation of different patterns on materials, is used
to improve the tribological performance of materials. Therefore, the effects of different …

In this study, we performed three surface modifications for AISI H13 steel to study their
protective effects in 1023 K molten aluminum. Results showed that air oxidation can produce …

In this study, the corrosion resistance of DLC and W-DLC films deposited on plasma nitrided
samples was investigated. The microstructures of the samples were characterized by XRD …

Plasma nitriding is one of the most important surface modification technologies. In this
research, DC plasma nitriding of 304 austenitic stainless steel was conducted at different …

Plasma nitriding was conducted at low gas pressure and low temperature of 400° C for 304
austenitic stainless steel. The combined performance of the treated specimens was …

In this study, liquid oxy-nitriding (LON) at different temperatures (430° C, 450° C, 470° C)
was employed on the AISI H13 steel. Effects of LON on wear and molten aluminum …

Laser processing parameters of an ytterbium fiber laser were explored using a two-stage
searching strategy to form an optimum surface layer on Fe-14Cr ferritic alloy samples for …

Possibility of improving the resistance of AISI H13 steel to molten aluminum corrosion by
liquid nitrocarburizing (LNC) was explored. The effects of the LNC parameters in terms of …