The corrosion behavior of specimens consisting of two regions of a Ni3 (Si, Ti) single-phase
of L12 structure and two phases of L12 and fcc Ni was examined in 0.5 kmol/m3 HCl …

Ni (Si)/Ni5Si2 powders were produced by mechanical alloying (MA) of Ni–25at.% Si powder
mixture. Then, the as-milled powders were sprayed onto copper substrate using high …

The tribological properties of Ni3Si alloy were studied at high temperatures. The effect of the
addition of Ti was also analyzed. The surface composition was analyzed by Raman …

In this study, Ta was added to an L1 2-type Ni 3 (Si, Ti) alloy at different levels and into
different substitution sites, substituting for either Ni, Ti or Si. The solubility limits of Ta in the …

The pitting corrosion of Ni3 (Si, Ti) with 2at% Mo consisting of a single intermetallic
compound Ni3 (Si, Ti) phase of L12 structure and a two phase mixture of L12 and fcc nickel …

The environment-induced cracking (EIC) of as cold-rolled Ni 3 (Si, Ti) and Ni 3 (Si, Ti) with
2Mo has been investigated as functions of applied stress, chloride ion concentration, test …

The pitting corrosion of Ni 3 (Si, Ti) intermetallic compound was investigated as function of
chloride concentration by using electrochemical method and scanning electron microscope …

The corrosion behaviour of the intermetallic compounds Ni 3 (Si, Ti)(L1 2: single phase), has
been investigated using an immersion test, electrochemical method, scanning electron …

The corrosion behavior of the Ni3Al/Ni3V two‐phase intermetallic compounds with and
without minor elements (Nb, Co, and Cr) to be composed of L12 phase (Ni3Al) and a mixed …

The pitting corrosion of 5052 alloy was investigated as function of chloride concentrations by
using an electrochemical method, scanning electron microscope and energy dispersive X …