Titanium dioxide (TiO2) is one of the most widely used metal dioxides for applications such
as semiconductors, photocatalysts, pigments, pharmaceutical excipients, and antimicrobials …

This publication summarises the current state of knowledge and technology on the
possibilities and limitations of using mineral and synthetic fillers in the field of 3D printing of …

The present study describes a simple and robust method for fabricating superhydrophobic
surfaces of Polylactic Acid (PLA) using the Fused Deposition Modelling (FDM) process …

Polypropylene (PP) is an engineered thermoplastic polymer widely used in various
applications. This work aims to enhance the properties of PP with the introduction of titanium …

In this study, nanocomposites were fabricated with polycarbonate (PC) as the matrix
material. Cellulose Nanofiber (CNF) at low filler loadings (0.5 wt.% and 1.0 wt.%) was used …

The soft actuators of smart materials have attracted significant attention in recent years due
to their unique functions and distinctive characteristics. The actuators are composed of smart …

In the fused deposition modelling technique, various type of thermoplastic is printed layer by
layer. Among those biopolymers, Poly Lactic Acid occupies a massive space due to their …

Fused filament fabrication (FFF) is one of the low cost additive manufacturing (AM)
techniques capable of printing complex design (both with commercial and non-commercial …

In this work, strain rate sensitivity was studied for 3D-printed polycarbonate (PC) and
thermoplastic polyurethane (TPU) materials. Specimens were fabricated through fused …

In this paper, the 3D-printed textured samples are fabricated using fused deposition
modelling (FDM) process for two different polymers such as ABS and PLA. The primary …