Abstract TiNi/Ti 2 Ni-based gradient composite coatings reinforced with TiC and TiB x were
produced on TC4 substrates by laser cladding with different composition powder mixture …

Abstract The titanium alloy Ti 6 Al 4 V is widely used in industry due to its high strength-to-
mass ratio and good performance at high temperature. However, it exhibits poor tribological …

Thermal oxidation under water oxidizing atmosphere was performed on Ti6Al4V alloy under
different durations from 2 h to 8 h. Surface characterizations were performed using X-ray …

Plasma nitriding of the Ti-6Al-4V alloy (TA) sample was carried out in a plasma reactor with
a hot wall vacuum chamber. For ease of comparison these plasma nitrided samples were …

A boriding and aluminizing two-step method was used to fabricate a B–Al composite layer
on the surface of pure titanium. The composite layer was characterized by scanning electron …

Four different surface oxidation treatments, so-called, anodizing oxidation (AO), micro-arc
oxidation (MAO), plasma oxidation (PO) and thermal oxidation (TO), were applied to ultrafine …

Abstract Roughening of Ti6Al4V by blasting with alumina or zirconia particles improves the
mechanical fixation of implants by increasing the surface area available for bone/implant …

This paper deals with the study of the enhancement of the tribological properties of AA2024
through the deposition of a titanium coating. In particular two different coatings were …

The Ti-6Al-4V alloy is widely used in the manufacture of components that must have low
density and high corrosion resistance and fatigue strength. The fatigue strength can be …

In this paper the structure, properties and tribological behaviour of the binary β titanium alloy
Ti–15Mo have been investigated. Low-pressure triode plasma diffusion processes were …