For elevated-temperature thermomechanical processing, the occurrence of recrystallization
during straining is known as dynamic recrystallization (DRX), which usually happens in Mg …

The effect of grain size on the mechanical properties of an equiatomic CoCrFeNiMn high-
entropy alloy (HEA) was investigated by shear punch testing (SPT) as a miniature test …

In this work, the low-cost Mg-10Zn-1Al-0.5 Cu-0.3 Mn without or with the addition of MgCO 3
(labeled as S1 and S2 alloys) was successfully fabricated by a rapid-setting water-cooling …

Shear punch testing, as a cost-efficient miniature testing technique for investigating the
mechanical properties under shear loading conditions, was utilized for the first time to …

Magnesium (Mg) alloys have been receiving significant applications in automotive and
aerospace industries owing to its high strength-to-weight ratios. Approximately 30%(by …

The effect of yttrium addition on the grain refinement, formation of long period stacking
ordered (LPSO) structures, and improved hardness in hot extruded Mg 99.5-x Ni 0.5 Y x (x …

Microstructural evolution during reversion annealing of an AISI 304L stainless steel,
plastically deformed under shear mode, was investigated for the first time. Shear …

In this work, the effects of grain size on the compressive creep behavior of a peak-aged Mg-
10.5 wt% Y alloy were studied. Compressive creep tests were conducted at 523 K using …

Friction stir processing (FSP) has been applied to improve the microstructure and tensile
performance of as-cast Mg–3Zn-0.5 Zr magnesium alloy. By FSP, grains within the stir zone …

In this work, the high-temperature tensile behaviors of an extruded Mg-0.9 Mn-0.5 Ce (wt%)
alloy with bimodal-grained microstructure were investigated, and the tensile tests were …