Among various materials available for alleviating the corrosion-related degradation, thermal
sprayed Fe-based metallic glass coatings (MGCs) have received huge attention from the …

The porosity and oxide content in high-velocity oxy-fuel (HVOF)-sprayed amorphous
coatings usually show opposite dependence on spraying parameters (eg, the oxygen/fuel …

Porosity, an important and inevitable property of thermally sprayed coatings, considerably
influences the corrosion resistance of the coated materials. In this work, the correlation …

Atomic emission spectroelectrochemistry (AESEC) is a relatively novel technique that gives
real-time elemental dissolution rates for a material/electrolyte combination, either reacting …

The long term electrochemical corrosion behavior and passive film properties of a novel
dense Fe48Cr15Mo14C15B6Y2 (at.%) amorphous coating were investigated using …

Abstract Fe 48 Mo 14 Cr 15 Y 2 C 15 B 6 (at%) thin film metallic glasses (TFMGs) with
various thickness (125–745 nm) were deposited on glass and 304 stainless steel (SS) by …

The instantaneous kinetics of oxide formation and growth, in competition with passive film
dissolution and breakdown, were investigated for Ni-22 Cr and Ni-22 Cr-6 Mo (wt%) during …

The corrosion behavior of Cr 40 Co 39 Nb 7 B 14 and Cr 50 Co 29 Nb 7 B 14 bulk metallic
glasses in HCl solutions were investigated by immersion, electrochemical tests and …

Resolving structural and componential characteristics of passive film is a long-standing
challenge in corrosion science since it's difficult to separate extremely thin passive films. In …

The time resolution of the atomic emission spectroelectrochemical (AESEC) flow cell has
been investigated by numerical simulations. The results demonstrate that the time resolution …