Stellite3-Ti3SiC2-Cu composite coatings on IN718 by laser cladding towards improved wear and oxidation resistance
SY Zhang, XB Liu, Y Zhu, YF Liu, Y Meng… - Surface and Coatings …, 2022 - Elsevier
To improve the wear and oxidation resistance of IN718 (Inconel 718) superalloy under
severe conditions, a series of Stellite3 matrix composite coatings containing Ti 3 SiC 2/Cu …
severe conditions, a series of Stellite3 matrix composite coatings containing Ti 3 SiC 2/Cu …
Laser polishing of additive manufactured CoCr alloy components with complex surface geometry
KC Yung, TY **ao, HS Choy, WJ Wang… - Journal of Materials …, 2018 - Elsevier
Laser polishing, capable of polishing selective nonplanar areas, is exploited to improve the
surface roughness of additive manufactured metal components. It offers a highly repeatable …
surface roughness of additive manufactured metal components. It offers a highly repeatable …
Effect of CeO2 Addition on Grain Refinement and Mechanical Properties of Stellite-6 Coating Fabricated by Laser Cladding
C Cui, M Wu, R He, Y Gong, X Miao - Journal of Thermal Spray …, 2022 - Springer
To improve the wear resistance of the crankshaft, co-based coatings with different additions
of CeO2 (0, 1, 2, 3, 4 wt%) were successfully prepared by laser-cladding technology on the …
of CeO2 (0, 1, 2, 3, 4 wt%) were successfully prepared by laser-cladding technology on the …
Fabrication and tribological behavior of laser cladding Cu/Ti3SiC2 reinforced CoCrW matrix composite coatings on Inconel718 surface
XM **e, XB Liu, BM He, W Cheng, FZ Zhang… - Surface and Coatings …, 2024 - Elsevier
To satisfy the need for high wear resistance of Inconel718 alloy under harsh working
conditions, laser cladding technique was adopted to fabricate the Cu/Ti 3 SiC 2-CoCrW …
conditions, laser cladding technique was adopted to fabricate the Cu/Ti 3 SiC 2-CoCrW …
Temperature dependent sliding wear behaviour of Stellite 6 alloy
The present work investigates the frictional and sliding wear characteristics of cobalt-based
alloy, Stellite 6 at room temperature (RT), 150° C, and 300° C. Wear tests were performed …
alloy, Stellite 6 at room temperature (RT), 150° C, and 300° C. Wear tests were performed …
Microstructure, oxidation resistance and mechanical properties of stellite 12 composite coating doped with submicron TiC/B4C by laser cladding
Abstract Stellite 12 and Ti/B 4 C composite coatings were successfully fabricated on the
surface of 304 stainless steel substrates by laser cladding. The effect of Ti/B 4 C with …
surface of 304 stainless steel substrates by laser cladding. The effect of Ti/B 4 C with …
Modification of M2 hardfacing: Effect of molybdenum alloying and laser surface melting on microstructure and wear performance
The influence of alloying (10 wt% Molybdenum) and post deposition treatment (Laser
Surface Melting) on the structural characteristics and wear performance of Plasma Transfer …
Surface Melting) on the structural characteristics and wear performance of Plasma Transfer …
Study on tensile and thermal fatigue behaviors of additively manufactured cobalt-based alloys alloying with Al And Ni
X Yang, C Li, M Zhang, Z Ye, X Zhang, M Zheng… - Materials Science and …, 2022 - Elsevier
The paper explores the effects of Al and Ni on the performances of tensile and thermal
fatigue of the additive manufactured cobalt-based alloys. Additions of Al and Ni influence the …
fatigue of the additive manufactured cobalt-based alloys. Additions of Al and Ni influence the …
Laser surface melting of 10 wt% Mo alloyed hardfacing Stellite 12 plasma transferred arc deposits: Structural evolution and high temperature wear performance
Laser surface melting (LSM) process has been applied on the plasma transferred arc (PTA)
deposited Stellite 12 and 10 wt% Mo alloyed Stellite 12 in this study. Following the LSM …
deposited Stellite 12 and 10 wt% Mo alloyed Stellite 12 in this study. Following the LSM …
Erosion behavior and surface cracking mechanism of Co-based coating deposited via PTA under high-speed propellant airflow
X Men, F Tao, L Gan, F Zhao, Z Xu - Surface and Coatings Technology, 2019 - Elsevier
A Co-based coating was prepared on the surface of PCrNi3MoVA steel via plasma
transferred arc (PTA). A modified pressure-vented vessel was used to simulate the high …
transferred arc (PTA). A modified pressure-vented vessel was used to simulate the high …