A review: Alkali-activated cement and concrete production technologies available in the industry
A growing interest in alternative cements has emerged with the sole purpose of reducing the
environmental footprint associated with cement production. One of the promising …
environmental footprint associated with cement production. One of the promising …
Dynamic mechanical properties of one-part ultra-high performance geopolymer concrete
Geopolymer has been recognized as a promising construction material offering performance
comparable to traditional cementitious materials while significantly reducing carbon dioxide …
comparable to traditional cementitious materials while significantly reducing carbon dioxide …
[HTML][HTML] Achieving superior mechanical performance in one-part geopolymer composites through innovative hybrid fiber systems of recycled steel and PVA fibers
Abstract Fiber-Reinforced Geopolymer Composites (FRGCs) typically use mono-fiber
reinforcement, often overlooking the potential benefits of hybrid fibers. This article examines …
reinforcement, often overlooking the potential benefits of hybrid fibers. This article examines …
Flexural behaviour of reinforced one-part geopolymer concrete beams
The recent development of “one-part geopolymer” has significantly improved construction
safety and convenience, establishing it as a highly promising new type of low-carbon binder …
safety and convenience, establishing it as a highly promising new type of low-carbon binder …
Alkali-activated foams coated with colloidal Ag for point-of-use water disinfection
Alkali-activated foams are ceramic-like materials prepared at near-ambient temperature.
This study investigates them for point-of-use water disinfection, thus providing an alternative …
This study investigates them for point-of-use water disinfection, thus providing an alternative …
Metallic aluminium in municipal solid waste incineration fly ash as a blowing agent for porous alkali-activated granules
Porous alkali-activated materials are synthetic aluminosilicates that should be often
produced as granules for practical applications. In the present study, municipal solid waste …
produced as granules for practical applications. In the present study, municipal solid waste …
[HTML][HTML] Properties comparison of one-part and two-part alkali-activated slag pastes
K Yin, Y Jiang, Y Pan, Z Li, N **e, J Meng - Case Studies in Construction …, 2024 - Elsevier
In this paper, the fresh and hardened properties of one-part (that is, mixing a solid precursor
with a solid alkali activator and adding water) and conventional two-part alkali-activated slag …
with a solid alkali activator and adding water) and conventional two-part alkali-activated slag …
Preparation and Hydration Mechanisms of Low Carbon Ferrochrome Slag-Granulated Blast Furnace Slag Composite Cementitious Materials
C Ren, K Li, Y Wang, Y Li, J Tong, J Cai - Materials, 2023 - mdpi.com
Low carbon ferrochrome slag (LCFS) is the metallurgical waste slag from the carbon
ferrochrome alloy smelting process. Compared with high carbon ferrochrome slag, LCFS …
ferrochrome alloy smelting process. Compared with high carbon ferrochrome slag, LCFS …
Thermal, mechanical and microstructural properties of geopolymer mortars derived from ceramic sanitary-ware wastes: Pathway to net zero emission
A Rezzoug, K Ayed, N Leklou - Ceramics International, 2024 - Elsevier
In this study, the influence of curing temperatures (60, 80, and 100° C) and sodium
hydroxide concentrations molar (M) of (10 and 16) on the properties of geopolymer mortars …
hydroxide concentrations molar (M) of (10 and 16) on the properties of geopolymer mortars …
Elucidating the impact of chemical variability on the nano-structure of Fe-rich slags
Fe-rich silicate slags are promising resources in the production of alternative cementitious
materials. In this investigation, molecular dynamics simulations have been employed to …
materials. In this investigation, molecular dynamics simulations have been employed to …