Yttrium silicates (Y–Si–O oxides), including Y2Si2O7, Y2SiO5, and Y4· 67 (SiO4) 3O apatite,
have attracted wide attentions from material scientists and engineers, because of their …

A novel sintering additive based on LiNO3 was used to overcome the drawbacks of poor
sinterability and low grain boundary conductivity in BaZr0. 8Y0. 2O3− δ (BZY20) protonic …

This paper reports on the successful fabrication of γ-Y 2 Si 2 O 7 membranes with low
thermal conductivity, which is an important membrane property for achieving high …

Porous Si3N4 ceramics were prepared using PMMA as pore former, and the mechanical
and dielectric properties were investigated, as a function of porosity. Higher porosity was …

In this study, Si 3 N 4 ceramics combined with the Si 3 N 4-Li 2 OY 2 O 3 system were joined
by spark plasma sintering (SPS) at 30 MPa in N 2 atmosphere. The effects of the joining …

Porous boron nitride/silicon oxynitride (BN/Si 2 N 2 O) composites were fabricated by
pressureless sintering at 1650° C with Li 2 O as sintering aid. The influence of Li 2 O and …

Dense Si2N2O was successfully synthesized using 2mol% Li2O as an additive by a hot-
pressing method at 1500° C. Compared to other metal oxide additives, Li2O can significantly …

In this article, a novel pressureless solid-liquid reaction method is presented for preparation
of yttrium disilicate (γ-Y 2 Si 2 O 7). Single-phase γ-Y 2 Si 2 O 7 powder was synthesized by …

In order to achieve low-temperature densification of SiC ceramic, β-SiC nanopowder was
doped with Li 2 O together with Y 2 O 3–Al 2 O 3–MgO as sintering aids, and then spark …

Current SiC‐based ceramic–matrix composites (SiC–SiC CMCs) rely on carbon or boron
nitride fiber–matrix interphases for toughness and flaw tolerance. However, oxidation of …