Insights into properties, synthesis and emerging applications of polypyrrole-based composites, and future prospective: A review
Recent advancements in polymer science and engineering underscore the importance of
creating sophisticated soft materials characterized by well-defined structures and adaptable …
creating sophisticated soft materials characterized by well-defined structures and adaptable …
Factors affecting the electrical conductivity of conducting polymers
Metals had been significantly substituted by synthetic polymers in most of our daily
requirements, thus relaxing our life. Out of many applied areas, synthetic polymers …
requirements, thus relaxing our life. Out of many applied areas, synthetic polymers …
Effect of polymerization conditions on the physicochemical and electrochemical properties of SnO2/polypyrrole composites for supercapacitor applications
A stable and unique porous SnO 2/polypyrrole composite has been successfully
manufactured using various SnO 2 loadings (5, 8, 10, 15 and 20 wt%) by applying a direct …
manufactured using various SnO 2 loadings (5, 8, 10, 15 and 20 wt%) by applying a direct …
Optical and Color Investigation of the Effect of Laser Radiation on Polyaniline/Polyvinyl Pyrrolidone/Zinc Sulfide Nanocomposite Films
A nanocomposite (NC) of polyaniline (Pani), polyvinyl pyrrolidone (PVP) and zinc sulfide
(ZnS) nanoparticles (NP) was prepared using chemical coprecipitation and ex-situ casting …
(ZnS) nanoparticles (NP) was prepared using chemical coprecipitation and ex-situ casting …
Effect of laser irradiation on structural, linear and nonlinear optical characteristics of PVP/CMC/ZnS–NiO blends
MH Abdel-Kader, AAH Mohamed… - Journal of Laser …, 2023 - pubs.aip.org
PVP/CMC/ZnS–NiO blends were produced by casting, solgel and solid state reactions
methods. Both ZnS and NiO have a nanonature with a crystallite size of 3 and 70 nm …
methods. Both ZnS and NiO have a nanonature with a crystallite size of 3 and 70 nm …
Synthesize of ZnO and CuO nanoparticles with plasma jet at different treatment times and testing its optical parameters with UV-Vis-NIR
Abstract ZnO and CuO nanoparticles (NPs) were synthesized using an argon plasma jet with
treatment times of 5, 10, 15, and 20 min. XRD Investigation verified the existence of …
treatment times of 5, 10, 15, and 20 min. XRD Investigation verified the existence of …
Combined experimental and TDDFT computations for the structural and optical properties for poly (ortho phenylene diamine) thin film with different surfactants
Abstract Poly (ortho-phenylenediamine) micro-rods (PoPD) are synthesized in the acidic
medium at 25° C by an oxidative polymerization method in the absence or the presence of a …
medium at 25° C by an oxidative polymerization method in the absence or the presence of a …
Optical and Color Modification in Polycarbonate/ZnS-NiO Nanocomposite Films Due to Laser Exposure
We fabricate a nanocomposite (NC) of polycarbonate (PC), Zinc sulfide (ZnS) and Nickel
oxide (NiO) nanoparticle by the sol-gel and ex-situ casting processes. We trust that this study …
oxide (NiO) nanoparticle by the sol-gel and ex-situ casting processes. We trust that this study …
Synthesis and Characterization of Polycarbonate/Polystyren/Polyethylene Oxide/Zinc Sulfide Nanocomposites: Gamma Ray Induced Changes in their Optical and …
Amorphous polycarbonate (PC), amorphous polystyrene (PS), semicrystalline polyethylene
oxide (PEO) and zinc sulfide (ZnS) nanoparticles (NP) were used to fabricate …
oxide (PEO) and zinc sulfide (ZnS) nanoparticles (NP) were used to fabricate …
Tailoring the Optical Properties of Gamma Ray Irradiated Polyvinyl Alcohol/Carboxymethyl Cellulose/Sodium Lignosulfonate Blend Films for their Application in …
Polyvinyl alcohol, carboxymethyl cellulose and sodium lignosulfonate (PVA/CMC/LS) blends
were fabricated using a casting technique. Samples from the prepared PVA/CMC/LS films …
were fabricated using a casting technique. Samples from the prepared PVA/CMC/LS films …