To fix the bone in orthopedics, it is almost always necessary to use implants. Metals provide
the needed physical and mechanical properties for load-bearing applications. Although …

During the last decades, electron-beam treatment technologies (EBTT) have been widely
used for surface modification of metals and alloys. The EBT methods are known as accurate …

The wear and corrosion effects in marine or coastal environments are critical issues that
seriously deteriorate the service performance of marine infrastructure. Thus, development of …

Research was carried out to explore the effect of pulsed electron beam irradiation on the
behavior of structure and phase state in AISI 310S steel exposed to high-cycle fatigue. A 2.2 …

The reported study discusses the formation of micro-and nanocrystalline surface layers in
alloys on the example of Ti-Y and Al-Si-Y systems irradiated by electron beams. The study …

The electron-beam cycling additive technique was proposed for the formation of shape
memory Ti-Ta coatings on titanium substrate. On a commercially pure Ti plate, Ta film with a …

The paper compares the coatings produced by plasma electrolytic oxidation (PEO) on
commercially pure titanium and a novel superelastic alloy Ti-18Zr-15Nb (at.%) for implant …

Vacuum cathodic arc TiN coatings with overlaying TiO2 film were deposited on polished and
surface roughened by electron beam modification (EBM) Ti6Al4V alloy. The substrate …

This study employs a continuous scanning electron beam to deposit AlCoCrFeNi composite
cladding on the surface of 253MA austenitic stainless steel to enhance its surface properties …

This work presents results on the influence of thickness on the structure and biological
response of Cu-O coatings deposited on commercially pure titanium (cpTi) substrates using …