[書籍][B] AC motor control and electrical vehicle applications

KH Nam - 2018 - taylorfrancis.com
AC Motor Control and Electrical Vehicle Applications provides a guide to the control of AC
motors with a focus on its application to electric vehicles (EV). It describes the rotating …

Design optimization of a high torque density spoke-type PM motor for a formula E race drive cycle

A Fatemi, DM Ionel, M Popescu… - IEEE Transactions …, 2018 - ieeexplore.ieee.org
Performance trade offs for achieving high torque density and high drive-cycle efficiency in
spoke-type permanent magnet (PM) motors are investigated. Unlike the traditional method …

Design and verification of in-slot oil-cooled tooth coil winding PM machine for traction application

A Acquaviva, S Skoog… - IEEE Transactions on …, 2020 - ieeexplore.ieee.org
Tooth coil windings, in particular when using a double layer structure, present opportunities
for in-slot liquid cooling. Since the windings are not overlap**, access to the slot from the …

Influence of slot openings and tooth profile on cogging torque in axial-flux PM machines

J Wanjiku, MA Khan, PS Barendse… - IEEE Transactions on …, 2015 - ieeexplore.ieee.org
Slotted axial-flux machines have excellent power and torque densities. However, it is difficult
to reduce their cogging torque due to the complexity associated with implementing classical …

Design and comparison of three-phase and five-phase FTFSCW-IPM motor open-end winding drive systems for electric vehicles applications

L Zhang, Y Fan, RD Lorenz, A Nied… - IEEE Transactions on …, 2017 - ieeexplore.ieee.org
This paper proposes and compares two new fault-tolerant fractional-slot concentrated-
winding interior permanent magnet (FTFSCW-IPM) motor open-end winding (OW) drive …

General analytical model of magnet average eddy-current volume losses for comparison of multiphase PM machines with concentrated winding

B Aslan, E Semail, J Legranger - IEEE Transactions on Energy …, 2013 - ieeexplore.ieee.org
This paper studies magnet eddy-current losses in permanent-magnet (PM) machines with
concentrated winding. First, space harmonics of magnetomotive force (MMF) and their …

Study on the selection of the number of magnetic poles and the slot-pole combinations in fractional slot PMSM motor with a high power density

T Wolnik, V Styskala, T Mlcak - Energies, 2021 - mdpi.com
Fractional slot, PMSM motors with a properly designed electromagnetic circuit allow for
obtaining high power density factors (more than 4 kW per 1 kg of total motor weight). The …

Design of optimal winding configurations for symmetrical multiphase concentrated-wound surface-mount PMSMs to achieve maximum torque density under current …

M Farshadnia, MAM Cheema… - IEEE Transactions …, 2017 - ieeexplore.ieee.org
Torque density of multiphase PMSMs can be enhanced by using current harmonic injection
(CHI) techniques that utilize potential torque-producing nonfundamental spatial harmonics …

Design considerations of five-phase machine with double p/3p polarity

J Gong, H Zahr, E Semail, M Trabelsi… - IEEE Transactions …, 2018 - ieeexplore.ieee.org
In the context of traction drives with required torque transient capabilities and a classically
wideflux weakening speed range, this paper gives design considerations of a particular …

A novel five-phase fractional slot concentrated winding with low space harmonic contents

B Zhao, J Gong, T Tong, Y Xu, E Semail… - IEEE Transactions …, 2021 - ieeexplore.ieee.org
In this article, a novel five-phase fractional-slot concentrated winding (FSCW) with 20-slot/22-
pole is presented. It benefits not only the advantages of conventional FSCW but also weak …