Abstract The Ti–Al system, specifically with Al wt pct ranging from approximately 4 to 14 pct,
has served as a model system for exploring the deformation behavior of the hexagonal close …

The microstructure of dual-phase Ti alloys crucially influences the nucleation of dwell fatigue
cracks, which is of significance in determining the dwell fatigue life of Ti alloys. However, the …

Slip intermittency and stress oscillations in titanium alloy Ti–7Al–O that were observed using
in-situ far-field high energy X-ray diffraction microscopy (ff-HEDM) are investigated using a …

In this paper, continuous SiC fiber-reinforced Ti60 (SiC f/Ti60) composites were fabricated
by preparing SiC f/Ti60 precursor wires from matrix-coated fibers and hot isostatic pressing …

The planar slip associated with the interaction between dislocations and α 2 precipitates in
titanium alloys was investigated using atomistic simulation and transmission electron …

In this work, the dwell sensitivity of the TC11 alloy was evaluated as a function of α p
contents obtained by two different heat treatment routes and peak applied stresses. The …

Grain-scale stress redistribution events are characterized within the Ti-6Al-4V (Ti64)
hexagonal close-packed α phase using far-field high-energy X-ray diffraction microscopy …

The crystal orientation of titanium alloys significantly influences the nucleation of dwell
fatigue cracks, which deteriorate the service life of aero-engine components. Although …

TIMETAL® 575 is an α+ β alloy reported to possess superior dwell fatigue capabilities over
the conventionally used Ti–6Al–4V. The increased performance of this alloy has in part been …

Ti 2 AlNb alloy is one of the candidate high strength titanium alloy materials under
consideration for compressor disc, which will endure dwell loading at high peak stress level …