Electrochemical discharge machining (ECDM) is demonstrated to be a potential process for
3D microstructuring of Pyrex glass. However, the key to widening ECDM micromilling …

Electrochemical discharge machining (ECDM) is found to be a potential process for the
microdrilling of glass wafers. However, some degree of heat-affected zone resulting from the …

Electrochemical discharge machining (ECDM) is an effective unconventional method for
micromachining in non-conducting materials, such as glass, quartz and some ceramics …

This paper deals with the performance of electro-chemical discharge machining (ECDM) of
a revolving glass rod. ECDM has been studied for machining insulating materials such as …

Electrochemical discharge machining (ECDM) involves the electrolytic formation of a gas
film at a tool electrode with high current density discharges and Joule heating for local …

Spark assisted chemical engraving (SACE) is a method for 3D microstructuring of glass or
other non-conductive materials with high aspect ratio and smooth surface quality. It is …

Recently, the utilization of pulse voltage has proved to be a potential method for improving
the machining accuracy in the microdrilling process by electrochemical discharge machining …

The present research deals with the experimental study of the effects of tool shape and
applied voltage on material removal rate of glass micro drilling using the ECDM process. In …

During two-phase electrolysis for hydrogen, aluminium or fluor production, there are bubbles
which are created at electrodes which imply a great hydrodynamic acceleration in the …