Superalloys are a group of engineering alloys designed to operate at elevated
temperatures, and they find application in various engineering sectors where a high …

In this paper, a powder feeding laser additive manufacturing technology has been used for
fabricating the Inconel 718 super-alloy. Laves phases of different sizes and morphologies …

The hot deformation behavior of an IN718 superalloy was studied by isothermal
compression tests under the deformation temperature range of 950–1100° C and strain rate …

In this study, the high cycle and very high cycle fatigue behavior of the GH4169 superalloy
was investigated. The results of the fatigue tests demonstrated that failures in the high cycle …

The current paper is devoted to classification of powder-bed additive manufacturing (PB-AM)
techniques and description of specific features, advantages and limitation of different PB-AM …

The hot deformation behaviors of Ni18Cr9Co9Fe5Nb3Mo superalloy were explored in the
formation temperature range free of γ'phase with various strain rates applied. The hot …

In this work, the GH4169 superalloy specimens were shot-peened at two different intensities
(0.15 mmA and 0.3 mmA) to improve the fatigue properties, and the fatigue behavior of the …

In this work we studied the influence of incline angle on the microstructure, tensile and
corrosion response of Inconel 718 (IN 718) samples fabricated via selective laser melting …

A magnesium alloy AZ31 sheet was processed by ultrasonic shot peening treatment to
fabricate a surface nanocrystalline, and a ball-on-disk dry sliding wear test was performed to …

To improve the fretting fatigue (FF) resistance of GH4169 superalloy, ultrasonic surface
rolling process (USRP) is carried once and three times on material surface and the effect of …