Recent advances in microstructural control via thermal spraying for solid oxide fuel cells

JT Gao, MB Hanif, HY Zhang, M Motola… - Chemical Engineering …, 2023‏ - Elsevier
This article provides a comprehensive review of the microstructure development of plasma-
sprayed ceramic coatings in relation to the deposition of functional layers within solid oxide …

A review and progress of multiphase flows in atmospheric and low pressure plasma spray advanced coating

SH Liu, JP Trelles, CJ Li, CX Li, HB Guo - Materials Today Physics, 2022‏ - Elsevier
Arc plasma sprayed thin films and coatings exhibit excellent mechanical properties for anti-
corrosion, anti-wear, anti-radiation, thermal isolation, and heat conduction applications …

Research advance in tribological properties of plasma sprayed ceramic particle reinforced alloy coatings

J He, J Xu, X Nie, Z Zhang, S Dosta, C Zhang - Ceramics International, 2024‏ - Elsevier
The preparation of conventional alloy coatings on workpiece surfaces is increasingly
inadequate to meet the requirements for tribological properties under extreme service …

Microstructure and wear properties of in-situ molybdenum composite coatings by plasma spraying Mo-B4C and MoO3-Al-B4C composite powders

Y Wang, Y Yang, X Wang, W Li, W Tian - Surface and Coatings Technology, 2023‏ - Elsevier
In this work, in-situ molybdenum composite coatings were prepared by plasma spraying Mo-
B 4 C and MoO 3-Al-B 4 C composite powders. The microstructure, microhardness and dry …

Microstructure and properties of molybdenum composite coatings by plasma spraying of Mo–SiC and MoO3–Al–SiC composite powders

Y Wang, Y Yang, X Wang, W Li, J Gou - Ceramics International, 2024‏ - Elsevier
To improve the sliding wear resistance of plasma sprayed Mo coating, Mo–SiC and MoO 3–
Al–SiC composite powders were used to prepare Mo composite coatings by plasma …

Numerical and experimental study on powder deposition mechanism of plasma sprayed YSZ-NiCoCrAlY coating

H Lu, J Pan, Y Gu, J **ao, X Hu, L Tan, M Lv - Powder Technology, 2023‏ - Elsevier
The YSZ-NiCoCrAlY thermal barrier coating system is a typical coating system for high-
temperature protection of hot-end components. Analyzing its powder deposition behavior …

[HTML][HTML] Studies on air jet erosion behavior of plasma-sprayed Cr2C3 coatings on Al6061 alloy

GSP Kumar, R Keshavamurthy, H Kumar… - Results in Surfaces and …, 2024‏ - Elsevier
This study assesses the efficacy of plasma-sprayed Cr 2 C 3 coatings on AA6061 aluminum
alloy in reducing erosion at different angles (30, 60, and 90°). The experimental setup …

Study of annular coaxial powder feeding effect on the characteristics of laminar plasma jet and atmospheric cluster deposition

HY Zhang, SJ Deng, SH Liu, CX Li, CJ Li - Surface and Coatings …, 2023‏ - Elsevier
In this paper, by means of numerical simulation and experimental analysis, the performance
of the engulfment based annular coaxial powder feeding method and the particle behaviors …

Effects of post-annealing on microstructure and mechanical properties of plasma sprayed Ti-Si-C composite coatings with Al addition

L Zhao, F Zhang, L Wang, S Yan, J He, F Yin - Surface and Coatings …, 2021‏ - Elsevier
Abstract In this study, Ti-Si-C composite coatings were fabricated by plasma spraying using
Ti/SiC/C/Al powder mixtures, and then these coatings were annealed at 500–900° C in an Ar …

[HTML][HTML] Variation in Nanocrystalline Phase Content on Mechanical Properties and Wear Resistance of FeCrMoWBRE Amorphous/Nanocrystalline Coating Deposited …

H Du, W **n, B Wang, J Feng, X **a, Y Wang, S Wei - Nanomaterials, 2025‏ - mdpi.com
The incorporation of a homogeneously distributed nanocrystalline phase in Fe-based
amorphous coatings is widely acknowledged to enhance wear resistance across various …