Organic-inorganic hybrid-photoanode built from NiFe-MOF and TiO2 for efficient PEC water splitting
W Cui, H Bai, J Shang, F Wang, D Xu, J Ding, W Fan… - Electrochimica …, 2020 - Elsevier
Constructing the high-performance photoanode is critical to improve photoelectrochemical
(PEC) efficiency, but it is still an inevitable challenge to rationally fabricate the organic …
(PEC) efficiency, but it is still an inevitable challenge to rationally fabricate the organic …
Band-gap narrowing and electrochemical properties in N-doped and reduced anodic TiO2 nanotube arrays
Electrochemical activity of TiO 2 nanotube arrays (NTAs) is restricted by a wide band gap of
TiO 2. To overcome this restriction, we considered systematic research on two effective …
TiO 2. To overcome this restriction, we considered systematic research on two effective …
Efficient Photocatalytic Partial Oxidation of Aromatic Alcohols by Using ZnIn2S4 under Green Conditions.
The ternary chalcogenide ZnIn2S4 (ZIS) has been synthesized by a simple hydrothermal
method in which the carcinogen thiacetamide, universally used as a precursor, has been, for …
method in which the carcinogen thiacetamide, universally used as a precursor, has been, for …
[HTML][HTML] Enhancing H2 production rate in PGM-free photoelectrochemical cells by glycerol photo-oxidation
The photo-oxidation of glycerol was carried out by using TiO 2 NTs photoanodes and Ni
foam as the cathode for the Hydrogen Evolution Reaction. The photoanodes were prepared …
foam as the cathode for the Hydrogen Evolution Reaction. The photoanodes were prepared …
Characterization and properties of PEO coatings on 7075 Al alloy grown in alkaline silicate electrolyte containing KMnO4 additive
Plasma electrolytic oxidation (PEO) was used to modify the surface of 7075 Al alloy by
applying a bipolar pulsed-current in a silicate based electrolyte containing 0 to 3 g L− 1 …
applying a bipolar pulsed-current in a silicate based electrolyte containing 0 to 3 g L− 1 …
A study on electrical properties of thermally grown TiO2 film at the interface of Ti/RuO2–IrO2–TiO2 anode using Mott-Schottky and electrochemical impedance …
This work aimed to achieve optimal thermal oxidation parameters to create a TiO 2 film with
excellent electrical properties at the interface of Ti/RuO 2–IrO 2–TiO 2 anode to increase the …
excellent electrical properties at the interface of Ti/RuO 2–IrO 2–TiO 2 anode to increase the …
Bandgap Engineering of TiO2 for Enhanced Selectivity in Photoelectrochemical Glycerol Oxidation
The application of photoelectrochemical cells to the partial oxidation of biomass represents
a promising avenue as a sustainable process for obtaining valuable products. However …
a promising avenue as a sustainable process for obtaining valuable products. However …
Optimization of aluminum doped ZnO nanowires for photoelectrochemical water splitting
Undoped and aluminum-doped ZnO nanowire (NW) arrays with high aspect ratio and
do** concentration up to 2.0 at.% in Al, were prepared by chemical bath deposition (CBD) …
do** concentration up to 2.0 at.% in Al, were prepared by chemical bath deposition (CBD) …
Electrochemical reduction on nanostructured TiO2 for enhanced photoelectrocatalytic oxidation
The influence of an electrochemical treatment method was investigated for two different TiO
2 nanostructured materials, anatase nanotubes (TNT) and rutile nanorods (TNR). The …
2 nanostructured materials, anatase nanotubes (TNT) and rutile nanorods (TNR). The …
Immobilized Nano-TiO2 Photocatalysts for the Degradation of Three Organic Dyes in Single and Multi-Dye Solutions
Heterogeneous photocatalysis with titanium dioxide (TiO2) is considered one of the most
promising Advanced Oxidation Processes (AOPs). In order to solve issues related to catalyst …
promising Advanced Oxidation Processes (AOPs). In order to solve issues related to catalyst …