This review focuses on the potential advantages of iron aluminides as an alternative binder
for cemented carbides, by means of thermodynamics, microstructure, mechanical properties …

Two kinds of CoCrFeMnNi high entropy alloy (HEA) coatings were prepared by high-speed
laser cladding (HS-) and normal laser cladding (N-), respectively. The phase, microstructure …

A multi-component category of an alloy containing very specific properties revolutionized the
area of material science and the present engineering era. Laser cladding, a technique for …

Erosion, abrasion, and corrosion are the common problems in various industries, namely
hydropower plants, thermal power plants, offshore, chemical, food processing, oil industries …

Copper alloy-molybdenum coatings were prepared on the surface of Cu-Cr-Zr alloys by
laser cladding. The phase and microstructure were observed, and the hardness …

The paper describes the method for producing WC-10wt% Co hard alloy with 99.6% of the
theoretical density and a Vickers hardness of~ 1400 HV 0.5. Experimental data on …

Improving the mechanical properties of metal matrix composites (MMCs) by the addition of a
ceramic phase is one of the present studying hot spots. Understanding the morphology …

In this study, The WC-Ni composite powders were fabricated by the electroless plating of
nickel-phosphorus, followed by the appliance of the obtained particles as a coating on an …

CoAlTiWTa refractory high-entropy alloy (RHEA) coatings were prepared on the surfaces of
Inconel 718 superalloy by pulsed laser cladding under different powers up to 75 W. Phase …

Ni-based wear-resistant coatings were prepared on substrates comprising 45 steel by laser
cladding. By adjusting the proportion of hexagonal boron nitride (h-BN), the microstructure of …