Alloys based on γ-TiAl are lightweight materials with attractive mechanical properties at high
temperatures. Although these alloys reveal a superior resistance against environmental …

The low density, high specific strength, and good creep properties make TiAl alloys being
promising high-temperature structural materials in aerospace and automotive industries …

The paper concerns the deposition and high temperature oxidation behavior of simple
aluminide and SiAl coatings on the TiAl-based alloy TNB-V5. The coatings were produced …

The goal of the paper was to elucidate the effect of a Ti 5 Si 3 interlayer on the high
temperature oxidation resistance of the Al-Ti coatings. During cyclic oxidation at 900° C for …

In this study, the suitability of a magnetron sputtered Al–18Si (at.%) coating as oxidation
protection for a γ-TiAl based TNB-V2 alloy was investigated. The coating microstructure and …

Recently γ-TiAl intermetallics have been successfully applied on low pressure turbine
blades of modern jet engines mostly due to their low density, high specific strength and …

Abstract An Al–Si coating was successfully fabricated on Ti–6Al–4V alloy substrate by
means of mechanical alloying method. The coating was prepared with Al–33.3 wt% Si …

A novel silicon-aluminizing diffusion coating was prepared on γ-TiAl alloy by cold sprayed Al-
12Si alloy coating and subsequent heat treatment. The oxidation resistance of silicon …

Alloys based on intermetallic phases of a Ti–Al system are materials that, thanks to their
resistance characteristics, can be widely used in automotive and aerospace applications …

Purpose: The goal of the paper is to present the review of characterisation of microstructure,
properties as well as technology of receiving the heat resistance layers used as bond coats …