The paper presents a method of determination for the probability of a scaffold failure at
maximum loads which are measured in one week. The research concerns scaffolding which …

Scaffoldings are used for works at height and in places that are hard to reach, which makes
such works dangerous to employees and accidents occur frequently. Loads generated by …

The purpose of this paper is to show the influence of incorrect scaffolding foundations on the
stress in their elements. Static stress analysis was performed for exemplary steel façade …

This paper presents an analysis of scaffolding response to static wind action, based on
different approaches. The static wind load was adopted according to Eurocode standard that …

Scaffolds are the structures that are temporarily installed for workers to stand on while
working at height. They constitute approximately 12%–15% of entire project costs. This study …

An attached cantilever scaffold, which mainly consists of a cantilever horizontal steel beam
and a diagonal bar, is a new type of cantilever scaffold. The upper end of the diagonal bar is …

The paper presents analysis of the vibrational environment on scaffoldings. It is based on
the results obtained in the project considering workers safety on scaffoldings. The total …

The paper presents a new research method for measuring axial forces in scaffolding on a
construction site in difficult measurement conditions, consisting of a device, a measurement …

Scaffolds are temporary structures that include anchors, elements, and platforms that are
used during the construction of steel or concrete structures to support equipment or workers …

The paper presents static-strength analyses of 120 scaffoldings used on construction sites in
Poland in the period 2016-2018. The geometry of each analysed scaffolding was taken from …