Review of functionally graded thermal sprayed coatings

L Łatka, L Pawłowski, M Winnicki, P Sokołowski… - Applied Sciences, 2020 - mdpi.com
The paper briefly describes major thermal spray techniques used to spray functionally
graded coatings such as atmospheric plasma spraying, high velocity oxy-fuel spraying …

Current status, challenges, and future prospects of thin film coating techniques and coating structures

M Sathish, N Radhika, B Saleh - Journal of Bio-and Tribo-Corrosion, 2023 - Springer
Thin film technology has been widely used in various industries to improve the mechanical,
physical, and chemical properties of bulk materials. This review paper provides an overview …

Evaluation of Structural Stability, Mechanical Properties, and Corrosion Resistance of Magnesia Partially Stabilized Zirconia (Mg-PSZ)

D Yusuf, E Maryani, DF Mardhian, AR Noviyanti - Molecules, 2023 - mdpi.com
Nano Zirconia (ZrO2) has been used in dental implants due to having excellent mechanical
properties and biocompatibility that match the requirements for the purpose. Zirconia …

Simulation of residual stress in thick thermal barrier coating (TTBC) during thermal shock: A response surface-finite element modeling

M Rajabi, MR Aboutalebi, SH Seyedein, SA Ataie - Ceramics International, 2022 - Elsevier
The current study demonstrates a well-designed response surface methodology (RSM),
based on the generated dataset of finite element method (FEM) to establish an integrated …

Residual stresses in functionally graded thermal barrier coatings

A Bhattacharyya, D Maurice - Mechanics of Materials, 2019 - Elsevier
Functionally graded materials offer potential as a solution to the premature failure of thermal
barrier coatings due to thermal residual stresses, however this solution has not been fully …

Isothermal oxidation behavior and kinetics of thermal barrier coatings produced by cold gas dynamic spray technique

AC Karaoglanli, A Turk - Surface and Coatings Technology, 2017 - Elsevier
The cold gas dynamic spray (CGDS) method was employed to deposit the CoNiCrAlY bond
coats of thermal barrier coating (TBC) system. The oxidation behavior of the coatings were …

[HTML][HTML] Consideration of spatial variation of the length scale parameter in static and dynamic analyses of functionally graded annular and circular micro-plates

I Eshraghi, S Dag, N Soltani - Composites Part B: Engineering, 2015 - Elsevier
This article introduces new methods for static and free vibration analyses of functionally
graded annular and circular micro-plates, which can take into account spatial variation of the …

Design and fabrication of porous ZrO2/(ZrO2+ Ni) sandwich ceramics with low thermal conductivity and high strength

R Zhang, R He, W Zhou, Y Wang, D Fang - Materials & Design (1980-2015), 2014 - Elsevier
Abstract 3Y–ZrO 2/(3Y–ZrO 2+ Ni) sandwich ceramics were fabricated through cold isostatic
pressing and pressureless sintering. Porous 3Y–ZrO 2 ceramics with large connecting open …

Improving wear resistance of plasma-sprayed calcia and magnesia-stabilized zirconia mixed coating: roles of phase stability and microstructure

MAE Hafez, SA Akila, MA Khedr, AS Khalil - Scientific Reports, 2020 - nature.com
The phase stability and microstructure of ZrO2–5CaO and ZrO2–24MgO mixed coating
(wt%) by air plasma spraying on 304 stainless steel substrates were investigated. A Ni–5Al …

Low thermal conductivity Sr2+, Zn2+ and Ti4+ ions co-doped LaMgAl11O19 for potential thermal barrier coating applications

H Lu, CA Wang, C Zhang - Ceramics International, 2014 - Elsevier
The influences of partial substitution of La 3+, Mg 2+ and Al 3+ by Sr 2+, Zn 2+ and Ti 4+,
respectively, in LaMgAl 11 O 19 magnetoplumbite were studied by evaluating the thermal …