Reinforcing potential of MWCNTs on mechanical and machining performance of hot-pressed ZTA-MgO ceramic cutting inserts
A new generation cutting insert was manufactured by multi-walled carbon nanotube
(MWCNT) reinforcement (0–0.25 weight percentage (wt%)) into zirconia toughened alumina …
(MWCNT) reinforcement (0–0.25 weight percentage (wt%)) into zirconia toughened alumina …
[HTML][HTML] Fabrication, microstructure and properties of advanced ceramic-reinforced composites for dental implants: a review
M Thanigachalam, AVM Subramanian - Biomaterials Translational, 2023 - ncbi.nlm.nih.gov
The growing field of dental implant research and development has emerged to rectify the
problems associated with human dental health issues. Bio-ceramics are widely used in the …
problems associated with human dental health issues. Bio-ceramics are widely used in the …
Effect of MWCNTs on micromechanical and high-temperature tribological behavior of ZTA-MgO ceramic composites
Correlating the microstructure and tribo-mechanical properties is a promising approach for
evaluating the performance of any newly decorated high-temperature materials. Aiming to …
evaluating the performance of any newly decorated high-temperature materials. Aiming to …
Preparation, microstructure evolution, and mechanical-thermal properties of porous mullite ceramics sintered from Al2O3-SiO2 amorphous micropowders
M Tian, Q Yang, Y Yu, Y Zheng, F Liu, X He - Journal of the European …, 2025 - Elsevier
Currently, the liquid-phase approach is widely used for the preparation of Al 2 O 3-SiO 2
composite powders because of its easy controllability composition and homogeneity of the …
composite powders because of its easy controllability composition and homogeneity of the …
Microstructure and mechanical properties of zirconia toughened nacre-like alumina ceramics
J Chen, W Wang, X Sun, G Sun, Y Liang - Materials Science and …, 2022 - Elsevier
In this study, the nacre-like alumina ceramics, with introduction of zirconia, are fabricated by
freeze casting followed by hot pressing. The experimental results show that zirconia …
freeze casting followed by hot pressing. The experimental results show that zirconia …
Simple approach to medical grade alumina and zirconia ceramics surface alteration via acid etching treatment
In order for bioceramics to be further used in composites and their applications, it is
important to change the surface so that the inert material is ready to interact with another …
important to change the surface so that the inert material is ready to interact with another …
Effects of La2O3 addition on microstructure development and physical properties of harder ZTA-CeO2 composites with sustainable high fracture toughness
The influence of La 2 O 3 inclusion (0–3 wt%) on the microstructure, phase formation and
mechanical properties of zirconia toughed alumina (ZTA) added with 5.0 wt% CeO 2 was …
mechanical properties of zirconia toughed alumina (ZTA) added with 5.0 wt% CeO 2 was …
Influences of nano-3Y-TZP reinforcement on phase transformation and crystallite size modification of zirconia-toughened alumina and Rietveld refinement of …
The effects of varying amount of nano-3 mol% yttria-stabilized zirconia addition on the
crystal structures, mechanical, and microstructural properties of zirconia-toughened alumina …
crystal structures, mechanical, and microstructural properties of zirconia-toughened alumina …