Abstract The Department of Energy (DOE) has identified the reduction of H 2 production cost
as a prominent objective. Therefore, any factor that influences the system's functionality and …

Current theoretical models and electrochemical techniques used to investigate corrosion
mechanisms, including corrosion rates, have been tailored for conventional alloy systems …

Passivity breakdown and metastable pitting of stainless steel 316 L was investigated in
chloride-containing solution using in-situ microscopy and atomic spectroelectrochemistry …

This work reports the corrosion behaviour of a novel laser direct energy deposited Ti 45 V 30
Zr 12 Nb 12 Al 1 lightweight multi-principal element alloy (MPEA) in a 0.6 M NaCl solution …

This article reports a study on the corrosive wear of carbon steel in water-based emulsion
drilling fluids containing green corrosion inhibitors, PEG-6 isotridecyl phosphate and PEG-2 …

In this work, high-strength 7075 and 7050 aluminum alloys were processed by the laser
powder bed fusion (LPBF) technique. Titanium and boron carbide particles were added to …

The solid–liquid interface, where corrosion reactions occur, is notoriously difficult to study in
operando conditions. Few experimental techniques can provide surface sensitivity and …

The dissolved masses of Fe, Cr, Al, and Si in H 2 SO 4 solution during the polarization of Cr-
containing steels were quantified by online ICP-OES. The active dissolution current on 11Cr …

Electrochemical techniques are coupled with inductively coupled plasma atomic emission
spectrometry (ICP-AES) for in-line electrolyte analyses. In this way, a direct measurement of …

This work investigated the effects of L1 2 nanoprecipitates on the electrochemical corrosion
behavior and passive film characteristics of CoCrNiAlTi-type high-entropy alloys (HEAs) in …