Structure–Property Correlation of Plasma-Sprayed Inconel625-Al2O3 Bimodal Composite Coatings for High-Temperature Oxidation Protection
High-temperature oxidation in coal-fired power stations is a major challenge. Thermal
spraying is a prospective surface modification method to deposit protective coatings to …
spraying is a prospective surface modification method to deposit protective coatings to …
High-temperature oxidation and erosion resistance of Ni-based thermally-sprayed coatings used in power generation machinery: a review
The life of the components operating under various high-temperature environments
decreases due to the activation of different failure mechanisms. High-temperature oxidation …
decreases due to the activation of different failure mechanisms. High-temperature oxidation …
Structure-property correlation and high-temperature erosion performance of Inconel625-Al2O3 plasma-sprayed bimodal composite coatings
In the present experimental work, Inconel-625 (IN625) was reinforced with Al 2 O 3 (30 wt%)
to develop composite coatings with plasma spraying technique on ASTM SA210 GrA1 boiler …
to develop composite coatings with plasma spraying technique on ASTM SA210 GrA1 boiler …
Effect of addition of Al2O3 on the high-temperature solid particle erosion behaviour of HVOF sprayed Inconel-718 coatings
In the present study, three different coatings Inconel718+ 10 wt% Al 2 O 3, Inconel718+ 20
wt% Al 2 O 3 and Inconel718+ 30 wt% Al 2 O 3, were deposited by using a high-velocity oxy …
wt% Al 2 O 3 and Inconel718+ 30 wt% Al 2 O 3, were deposited by using a high-velocity oxy …
Erosion behaviour of HVOF sprayed Alloy718-nano Al2O3 composite coatings on grey cast iron at elevated temperature conditions
The current study investigates the erosion performance of high-velocity oxy-fuel (HVOF)
sprayed Alloy718-nanoAl 2 O 3 composite coatings on cast iron. The effect of the addition of …
sprayed Alloy718-nanoAl 2 O 3 composite coatings on cast iron. The effect of the addition of …
Additively manufactured AlSi10Mg inherently stable thin and thick-walled lattice with negative Poisson's ratio
Literature on the mechanical performance of additively manufactured (AM) negative
Poisson's ratio (-υ) structures has been primarily focused on beam-based re-entrant …
Poisson's ratio (-υ) structures has been primarily focused on beam-based re-entrant …
Mechanical performance of additively manufactured pure silver antibacterial bone scaffolds
Implant infection is a serious complication resulting in pain, mortality, prolonged recovery,
and antimicrobial resistance (AMR). Reducing the risk-of-infection associated with tissue …
and antimicrobial resistance (AMR). Reducing the risk-of-infection associated with tissue …
Development of alumina-based hybrid composite coatings for high temperature erosive and corrosive environments
Low alloy steels are being used for structural applications exposed to extreme
environmental conditions such as, high temperature, corrosive and erosive environment in …
environmental conditions such as, high temperature, corrosive and erosive environment in …
Additive manufacturing of anti-SARS-CoV-2 copper-tungsten-silver alloy
Purpose The COVID-19 pandemic emphasises the need for antiviral materials that can
reduce airborne and surface-based virus transmission. This study aims to propose the use of …
reduce airborne and surface-based virus transmission. This study aims to propose the use of …
[HTML][HTML] High-temperature oxidation and erosion of HVOF sprayed NiCrSiB/Al2O3 and NiCrSiB/WCCo coatings
Material deterioration due to erosion and oxidation in high-temperature environments is a
major cause of wear in power plants, aircraft engines and petrochemical industries. NiCrSiB …
major cause of wear in power plants, aircraft engines and petrochemical industries. NiCrSiB …