Abstract In this article, Al 1050/Mg-AZ31B two-layer sheets were fabricated by the roll
bonding technique. Then, forming limit diagrams and mechanical characteristics were …

Manufacturing metallic micro channels is a critical issue in micro-electromechanical systems
(MEMS), such as micro reactors, micro heat exchangers, micro heat sinks, and fuel cell …

The aim of this research was to introduce a simulation-based approach for determination of
the Forming limit curve (FLC) in two-layer metallic sheets. In this study, the FLC of aluminum …

Compared with monolithic metal sheet, Single Point Incremental Forming (SPIF) of bimetal
composite sheet has attracted increasing attention, as it takes advantages of materials with …

Different annealing treatments at 400-900° C for 1 h were applied on copper/SS304L
composite sheets, and the evolutions of microstructure and mechanical properties were …

In the last few decades, metal-based composites and related manufacturing methods have
attained a significant research attention thanks to the possibilities they offer to tailor both the …

Bimetal composites have wide applications due to their excellent overall performance and
relatively low cost. In this study, the formability of stainless/carbon steel bimetal medium …

The application of single point incremental forming (SPIF) on a composite sheet can
combine the benefits from process and material to achieve high formability of parts. In this …

The application of bimetallic sheets composed of two dissimilar sheet metals with distinct
properties has increasingly developed in recent years. Enhancement of bimetallic sheet's …

A combined experiment and multiscale modeling approach was presented to correlate the
mechanical properties of a roll-bonded AA1050/AA3004 bimetal clad sheet and …