Zn composite corrosion resistance coatings: What works and what does not work?

S Anwar, F Khan, Y Zhang, S Caines - Journal of Loss Prevention in the …, 2021 - Elsevier
Corrosion is one of the most significant contributors to structural degradation in process
industries. It causes process equipment failure, which can led to severe safety issues. One …

Characterization of nanostructured biodegradable Zn-Mn alloy synthesized by mechanical alloying

PS Bagha, S Khaleghpanah, S Sheibani… - Journal of Alloys and …, 2018 - Elsevier
In this study, nanostructured biodegradable pure Zn, Zn-4 wt.% Mn and Zn-24 wt% Mn alloys
were produced by 20 h mechanical alloying and consequent cold pressing and sintering …

Alkyd coating containing metal phosphomolybdate/cobalt ferrite nanocomposites as efficient corrosion inhibitor for stainless steel 316L in saline solution

MA Abd El-Ghaffar, NM Nooredeen, EA Youssef… - Journal of Industrial and …, 2024 - Elsevier
Nanocomposites of some metallo-phosphomolybdates (ZrO, VO, Mn and Mg-POMs) with
cobalt and manganese ferrites (CoFe 2 O 4 or MnFe 2 O 4) were synthesized and evaluated …

Electrochemical behaviour and analysis of Zn and Zn–Ni alloy anti-corrosive coatings deposited from citrate baths

S Anwar, Y Zhang, F Khan - RSC advances, 2018 - pubs.rsc.org
Anticorrosive coatings are a useful approach for protecting steel structures/machinery
against corrosion. Electrodepositions of zinc and zinc–nickel alloy films on steel substrates …

Electrochemical analysis of an electrodeposited Zn-Ni alloy films contained EDTA stable baths in 3.5 wt% NaCl solutions

S Anwar, F Khan, Y Zhang - Materials Today: Proceedings, 2020 - Elsevier
The electrochemical analysis of an electrodeposited Zn-Ni alloy coating on steel substrate
from a chloride bath containing ethylene-diamine-tetra-acetic acid (EDTA) was investigated …

Effect of chloride and sulfate ions on electrodeposition and surface properties of alloys produced from zinc-nickel-manganese gluconate baths

K Chat-Wilk, E Rudnik, G Włoch - Journal of The Electrochemical …, 2022 - iopscience.iop.org
Alloys were potentiostatically codeposited from gluconate baths containing zinc, nickel and
manganese chlorides and/or sulfates. The electrodeposits were characterized in terms of …

Influence of pulse operational parameters on electrodeposition, morphology and microstructure of Ni/nanodiamond composite coatings

M Sajjadnejad, H Omidvar, M Javanbakht - International Journal of …, 2017 - Elsevier
Nickel and Nickel-nanodiamond coatings have been successfully electrodeposited on
copper substrates by the pulse plating method. The variables investigated within this work …

Influence of current density on the mechanism of electrodeposition and dissolution of Zn–Fe–Co alloys

F Assaf, M Abou-Krisha, TA Yousef, A Abushoffa… - Russian Journal of …, 2020 - Springer
The electrodeposition of zinc–iron–cobalt alloys from sulfate bath was carried out
galvanostatically on steel. A complementary approach based on of a combination of different …

Electrochemical Studies of Zn-Ni-Fe Alloy Coatings for Better Corrosion Resistance Applications

RS Bhat, KB Munjunatha, SI Bhat… - Journal of Materials …, 2022 - Springer
Anti-corrosive alloy coatings are a valuable solution to the protection of low carbon steel
structures/equipment against corrosion. The Zn-Ni-Fe coatings have been deposited …