The phase composition, dislocation density and crystallographic texture associated with the
mechanical properties of Ti–15Mo alloys fabricated by selective laser melting (SLM) with …

Abstract 316L stainless steel is popular due to its strength, durability, and especially cost-
effectiveness in biomedical implant applications. However, the primary drawback of those …

Optimum process parameters for manufacturing a Ti10Mo alloy for biomedical applications
via the laser powder bed fusion (LPBF) process were determined. Fused tracks were …

Abstract In this paper, Ti-5Al-2.5 Sn-xMo (TASxM, x= 0, 5, 10, 15 wt%) alloys were designed
and prepared. Phase compositon and microstructure analysis results indicate that the …

The alloying effect of Zr on β (body-centred cubic)-phase stability was investigated in α
(hexagonal close packed)-type Ti–Al alloys. According to calculations and experiments …

Abstract The Ti-Fe-based alloys were in-situ synthesized by the combination of mechanical
alloying and laser melting deposition (LMD). The microstructure evolution and corrosion …

Purpose: Not all elements with β-stabilizing properties in titanium alloys are suitable for
biomaterial applications, because corrosion and wear processes release the alloying …

The diffusion behavior of the Al-Fe system was investigated by a classical molecular
dynamics simulation for simulating the Al coating process on Fe. Two bulks were built as the …

Abstract Gas atomized Tisingle bond15Mo alloy powder was processed by cryogenic
milling. Both initial gas atomized and milled powders were consolidated by spark plasma …

Martensitic phases are intermediate phases in Ti alloys and have obvious effects on
microstructure and properties of heat treated specimens. The martensitic transformation and …