Ni60A/WC in-situ reinforced composite coatings are prepared on Inconel 718 alloy by laser
cladding. The reinforcements/matrix micro-interface evolution, microhardness, and corrosion …

This review examines copper corrosion mechanisms and their key influencing factors,
including microstructure effects, surface treatments, manufacturing conditions, temperature …

Abstracts The waste incineration results in the emission of a substantial amount of high-
temperature corrosive atmosphere and particles, requiring stringently high-temperature …

The galvanic effect induced by partial coverage of corrosion products films is studied for
90/10 copper-nickel alloy in flowing NaCl solution using electrochemical and surface …

ZrC/ZrB 2 in-situ reinforced composite coatings were prepared by laser cladding on
zirconium alloy. The effect of WC content on microstructure and properties of in-situ reactive …

The influences of pre-immersion aeration conditions on the corrosion product films and their
erosion-corrosion resistance of 90/10 and 70/30 copper-nickel tubes are investigated …

Copper is widely used as conductive components in transmission lines, facing severe
corrosion risks. The current passing through copper conductors will significantly affect its …

The effect of silty sand on the dynamic mechanism of corrosion products formed on carbon
steel in a CO 2 environment containing 3.5 wt% NaCl and 0.1 wt% NaHCO 3 is investigated …

Thermal management in power electronics relies on active and passive cooling devices that
use porous copper structures. However, these critical components, such as sintered copper …

The flow-influenced corrosion (FIC) behavior of SA106B/316L stainless steel (SS) welded
joints with SS located upstream and downstream is investigated experimentally and …