The interaxle torque distribution of off-road vehicle is interfered with temperature field
variation of limited slip clutch during long-time sliding, which is controlled by actual heat flux …

The temperature plays a significant role in the tribology properties and failure of friction
materials during engagement of wet clutch. In order to obtain the temperature field of carbon …

The outer circlip constraint is a typical way for a wet multidisc clutch to limit the axial
displacement of friction components. The pressure transmission mechanism in a clutch …

A full-scale multi-disc clutch test bench was set up and some sliding experiments were
conducted to investigate the temperature evolution processes in low and high lubrication …

This work is devoted to investigate the thermodynamic characteristics of the deformed
separate plate in a multi-disc clutch. The thermodynamic model is proposed, and the contact …

A fluid-solid convective heat transfer model is constructed according to the velocity
distributed calculation of lubricant in clutch groove cavity. Considering the characteristics of …

In this paper, a novel power-shift transmission using hydro-viscous drive (HVD) technology
is proposed to improve starting comfort without affecting the drivetrain service life of a tractor …

An experimental system has been built up for the flow pattern analysis inside an open
grooved rotating-disk system. The geometric construction and the governing parameters of …

Wear maps for specific material combinations can be used to depict dominant wear
processes and their severity under a specified range of sliding conditions. Wet clutches are …

Four kinds of carbon fabric reinforced phenolic resin composites were fabricated by the
impregnation technique in the present study. And the effect of phenolic resin on friction and …