Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
On mechanical and tribological behaviour of microwave sintered TiN–5 wt% Al2O3–5 wt% Y2O3 nanocomposite
Titanium nitride has potential applications in wide range of mechanical parts, cutting tools
etc., primarily due to its high wear resistance. In the present study, a novel TiN-based …
etc., primarily due to its high wear resistance. In the present study, a novel TiN-based …
Polymer-derived SiHfN ceramics: From amorphous bulk ceramics with excellent mechanical properties to high temperature resistant ceramic nanocomposites
Within the present work, additive-free amorphous bulk SiHfN ceramics with excellent
mechanical properties were prepared by a resource-efficient low-temperature molding …
mechanical properties were prepared by a resource-efficient low-temperature molding …
[PDF][PDF] The effect of transition metal oxide do** on the sintering behaviour of yttria-stabilised tetragonal zirconia
The effect of small amounts (0.2 wt% and 0.5 wt%) of transition metal oxide (CuO) do** on
the sintering behavior of 3 mol% yttria-stabilized zirconia (Y-TZP) was investigated over the …
the sintering behavior of 3 mol% yttria-stabilized zirconia (Y-TZP) was investigated over the …
Cutting performance and failure mechanisms of TiB2-TiC-Al2O3 multi-dimensional gradient ceramic tool in intermittent turning of hardened steel
F Gong, X Ni, G Liu, C Liu, J Sun - … Journal of Refractory Metals and Hard …, 2024 - Elsevier
Abstract The TiB 2-TiC-Al 2 O 3 multi-dimensional gradient ceramic tool (MDGCT), whose
composition varied in two directions, were designed and fabricated via hot-pressed vacuum …
composition varied in two directions, were designed and fabricated via hot-pressed vacuum …
Effects of Ti (C, N) addition on the microstructure and mechanical properties of spark plasma sintered Si3N4/Ti (C, N) ceramic tool material
N Sun, Z Wang, B Yu, L Huang, Z Yin, J Yuan - Ceramics International, 2020 - Elsevier
Abstract Si 3 N 4/Ti (C, N) ceramic tool materials were investigated in this work. The effects
of Ti (C, N) addition and sintering temperatures on the mechanical properties, phase …
of Ti (C, N) addition and sintering temperatures on the mechanical properties, phase …
Yttria-reinforced Fe-Cr ferritic alloy-based nanocomposites for fusion reactor structural applications
Ferritic steel with oxide dispersion strengthening is a promising material for fusion and
fission reactor components. In the present study, the influence of Mo, V, and Zr on …
fission reactor components. In the present study, the influence of Mo, V, and Zr on …
Mechanical properties and unlubricated sliding wear behavior study of silicon nitride-based cermets
This article reports the mechanical properties and dry sliding wear behavior of
conventionally sintered Si3N4–Mo–Si and Si3N4–Mo cermets, where 15 wt% of oxide …
conventionally sintered Si3N4–Mo–Si and Si3N4–Mo cermets, where 15 wt% of oxide …
Fabrication of in-situ self-reinforced Si3N4 ceramic foams for high-temperature thermal insulation by protein foaming method
F Yang, Y Yao, Z Yang, S Zhao, G Chen, K Li - Ceramics International, 2021 - Elsevier
To meet demand for lightweight and high-strength ceramic foams, in-situ self-reinforced Si 3
N 4 ceramic foams, with compressive strength of 13.2–45.9 MPa, were fabricated by protein …
N 4 ceramic foams, with compressive strength of 13.2–45.9 MPa, were fabricated by protein …
Effect of Si powder on the phase composition, microstructure and properties of MgAl2O4-SiC composite materials
S Zhou, S Zhao, Z Wang, H Sun, Y Si, H Li - Ceramics International, 2025 - Elsevier
In this study, MgAl 2 O 4-SiC composites were prepared using SiC powder, MgAl 2 O 4
powder, Al powder and Si powder as raw materials under a flowing nitrogen atmosphere at …
powder, Al powder and Si powder as raw materials under a flowing nitrogen atmosphere at …
Effect of graphite addition on mechanical properties of Al2O3 ceramics by directed laser deposition
Y Xu, C Yu, Q Miao, S Yan… - Proceedings of the …, 2023 - journals.sagepub.com
In this article, graphite-reinforced Al2O3 ceramic materials were prepared by directed laser
deposition. The effects of graphite addition (3–12 wt.%) on the phase composition …
deposition. The effects of graphite addition (3–12 wt.%) on the phase composition …