In this paper, the relationship between anisotropic mechanical properties and the
corresponding microstructure evolution of wrought magnesium alloys is critically reviewed …

In order to study the behavior of material under finite deformation at various strain rates, the
responses of AZ31 Mg sheet are measured under uniaxial (tension and compression) and …

Slip and extension twinning are the dominant deformation mechanisms in Magnesium (Mg)
and its alloys. Crystal plasticity is a powerful tool to study these deformation mechanisms …

The plastic deformation of single crystal magnesium is strongly anisotropic. This gives rise to
deformation incompatibilities between grains during polycrystalline deformation, which are …

A FeCoCrNiMo 0.23 high entropy alloy was processed by powder metallurgy with two
conditions: hot extruded and annealed. In situ neutron diffraction, together with electron …

Abstract The Hall-Petch (H–P) relation for bimodal-grained Mg–Al–Zn alloys consisting of
both ultra-fine grains (UFGs)/fine grains (FGs) and coarse grains (CGs) is discussed …

Deformation twinning and detwinning in extruded Mg-4Al were investigated using in-situ
SEM-DIC experiments and crystal plasticity finite element (CPFE) simulation. In this study …

Extruded polycrystalline pure magnesium (Mg) with fine grain size (~ 1.2 µm) exhibits
ductility of over 100% at room temperature, in spite of the presence of a strong basal texture …

In situ neutron diffraction compression tests were performed on Mg–Y–Nd–Zr alloy WE43, in
the solution heat-treated, peak-and over-aged conditions. The flow curves and internal strain …

The effect of texture on the low-cycle fatigue behavior of a rolled magnesium alloy, AZ31B,
was studied at room temperature. It is shown that the Coffin–Manson and Basquin …