Duplex stainless steels (DSSs) with austenitic and ferritic phases have been increasingly
used for many industrial applications due to their good mechanical properties and corrosion …

Stainless steels (SSs) display striking characteristics which can nominate them as
prospective candidates for an endless list of applications. These properties can be further …

The objective of the current experimental study is to investigate influence of dissimilar
welding between 316 L Austenitic and 202 Austenitic Stainless Steel. This is achieved …

Abstract Duplex Stainless Steels (DSS) and Super Duplex Stainless Steel (SDSS) have
excellent integration of mechanical and corrosion properties. However, the formation of …

The effects of nitrogen addition in shielding gas on microstructure evolution and localized
corrosion behavior of duplex stainless steel (DSS) welds were studied. N 2-supplemented …

The corrosion behavior of Desulfovibrio vulgaris on M54 steel with different grain sizes was
investigated. The results demonstrated that pitting corrosion induced by D. vulgaris primarily …

The intergranular corrosion behavior of AISI 321H stainless steel was investigated using
oxalic acid etching, double-loop electrochemical potentiokinetic reactivation, anodic …

In this study, two stainless steel clad plates (STS 316L/A516-70N and STS 304L/A516-70N)
were fabricated without Ni interlayers by hot rolling and normalizing under the same …

The double loop electrochemical potentiokinetic reactivation method was modified and
applied to detect the susceptibility to intergranular corrosion of super austenitic stainless …

The microstructure and the phase identification of austenitic stainless steel AISI 316L with
low δ-ferrite content (δ≤ 1%) and aged for up to 80 000 h at temperatures ranging from 550 …