Nanoindentation derived elastic constants of carbon fibres and their nanostructural based predictions
Elastic constants of single carbon fibres were estimated by a novel nanoindentation based
method and subsequently predicted by modified two-and three-phase Eshelby-Mori-Tanaka …
method and subsequently predicted by modified two-and three-phase Eshelby-Mori-Tanaka …
Influence of surface fibre properties and textural organization of a pyrocarbon interphase on the interfacial shear stress of SiC/SiC minicomposites reinforced with Hi …
E Buet, C Sauder, D Sornin, S Poissonnet… - Journal of the European …, 2014 - Elsevier
SiC/SiC composites reinforced with 3rd generation SiC fibres (Hi-Nicalon S and Tyranno
SA3) are attractive for nuclear applications. The mechanical properties of SiC/SiC …
SA3) are attractive for nuclear applications. The mechanical properties of SiC/SiC …
Effect of gamma-irradiation on the mechanical properties of polyacrylonitrile-based carbon fiber
H ** turtle, Chelydra serpentina, shields
them from ferocious attacks of their predators while maintaining light-weight and agility for a …
them from ferocious attacks of their predators while maintaining light-weight and agility for a …
The effect of heat treatment temperature and time on the microstructure and mechanical properties of PAN-based carbon fibers
H **ao, Y Lu, W Zhao, X Qin - Journal of Materials Science, 2014 - Springer
The influence of heat treatment temperature from 1400 to 2840° C and time from 1.2 to 12.0
min on the structure and mechanical properties of polyacrylonitrile carbon fibers was …
min on the structure and mechanical properties of polyacrylonitrile carbon fibers was …
Recreating Silk's Fibrillar Nanostructure by Spinning Solubilized, Undegummed Silk
The remarkable toughness (> 70 MJ m− 3) of silkworm silk is largely attributed to its
hierarchically arranged nanofibrillar nanostructure. Recreating such tough fibers through …
hierarchically arranged nanofibrillar nanostructure. Recreating such tough fibers through …
Experimental and modeling study of the evolution of mechanical properties of PAN-based carbon fibers at elevated temperatures
In the present article, the degradation of the tensile properties of polyacrylonitrile (PAN)-
based carbon fibers at elevated temperatures in air was studied experimentally and …
based carbon fibers at elevated temperatures in air was studied experimentally and …
The effect of carbonization temperature on the structure and properties of carbon fibers prepared from poly (m-phenylene isophthalamide) precursor
I Karacan, L Erzurumluoğlu - Fibers and Polymers, 2015 - Springer
Carbon fibers with diameters ranging from 8.1 and 12.7 µ m were produced using a
commercially available meta-aramid precursor after oxidation and carbonization steps. The …
commercially available meta-aramid precursor after oxidation and carbonization steps. The …