Silicon carbide (SiC) fiber reinforced SiC matrix composites continue to undergo
development for fusion applications worldwide because of inherent advantages of the …

A review on the joining of SiC is given in response to the interest surge on this material for a
number of applications. Because the engineering design for the majority of applications …

SiC ceramic and SiC-based composites are promising structural materials for nuclear
applications. This paper gives a viewpoint of the basic characterization and research …

High strength SiC whisker-reinforced Ti 3 SiC 2 composites (SiC w/Ti 3 SiC 2) with an
improved thermal conductivity and mechanical properties were fabricated by spark plasma …

SiC ceramics were brazed by electric field-assisted sintering technology using
CoFeCrNiCuTi high-entropy alloy as joining filler. The effect on the interface microstructure …

In order to meet the sealing demands of SiC heat exchanger, the Ni-Mo filler alloy was
designed, prepared and employed to braze SiC ceramics. Wetting behavior of the Ni-Mo …

In this study, Y 2 O 3–Al 2 O 3–SiO 2 (YAS) glass was prepared from Y 2 O 3, Al 2 O 3, and
SiO 2 micron powders. Thermal expansion coefficient of as-obtained YAS glass was about …

In this study, niobium-based alloy C103 is joined to carbon fibre-reinforced SiC (C/SiC)
composite utilising commercially available Ticusil® and Cusil® alloy braze filler material …

Joining ceramics with ceramics and/or metals is of immense importance to widen the
application horizons of ceramics and metals. Solid-state joining is restrained by the high …

High‐strength SiC joints were successfully obtained by electric current field‐assisted
sintering technique at a low temperature of 1400° C using a Pr coating (100 nm) as the initial …