Interpenetrating phase composites (IPC) materials are designed to combine the advantages
of made-from materials or develop an intended behavior. Recently, the use of 3D printed …

Green cementitious materials are usually developed by the addition of high volumes of
mineral fillers. However, the addition of minerals can result in the reduction of mechanical …

Asphalt mixtures are widely used materials for paving roads, however, they need a
significant amount of virgin materials, and their preparation process is environmentally …

Asymmetrical single-edge notched beam (ASENB) specimen is among the suitable
specimens for measuring full mode I/II fracture parameters. However, in lack of a standard or …

This study assessed the impact of hybrid reinforcement from natural and synthetic materials
on the wear and mechanical properties of epoxy-based composite materials needed for …

This study investigates the quasi-static and dynamic fracture behaviors of rubber-modified
unsaturated polyester resin concrete (RUPRC) under different curing ages (1 d, 7 d, 28 d) …

The layered nature of the parts produced by 3D printing makes them susceptible to freeze-
thaw damage. This research investigates the effect of the freeze-thaw cycles on the tensile …

The tensile strength of asphaltic mixtures is an important parameter in designing the
pavement materials and life assessment of the overlays. This parameter is often determined …

Cracking is a significant concern for pavements and should be appropriately treated during
road, highway, and runway rehabilitation. This study investigates the behavior of asphaltic …

S2‐glass fiber reinforced plastics (S2‐GFRP) and basalt fiber reinforced plastics (BFRP)
have emerged as crucial materials due to their exceptional mechanical properties, and …