Precipitation transformation pathway and mechanical behavior of nanoprecipitation strengthened Fe–Mn–Al–C–Ni austenitic low-density steel
YF An, XP Chen, L Mei, P Ren, D Wei… - Journal of Materials …, 2024 - Elsevier
Precipitation strengthening has been widely adopted in austenitic low-density steel owing to
excellent hardened effects. This approach generally employs the coherent κ′-carbides and …
excellent hardened effects. This approach generally employs the coherent κ′-carbides and …
Enhancing strength-ductility synergy by introducing multilattice defects and heterogeneous structures in CoCrNi-based medium-entropy alloys prepared by powder …
L Wu, Y Liang, H Yin, Y Shen, X Chen - Materials Science and Engineering …, 2025 - Elsevier
In the work, cold rolling and annealing were applied to powder plasma arc additively
manufactured (CoCrNi) 94 Al 3 Ti 3 medium-entropy alloy (MEA) to efficiently attain different …
manufactured (CoCrNi) 94 Al 3 Ti 3 medium-entropy alloy (MEA) to efficiently attain different …
C-modified stacking-fault networks inducing the excellent strength-plasticity combinations of medium manganese steel by simple two-stage warm rolling without …
Y Zhang, R Song, Y Wang, C Cai, H Wang, K Wang - Scripta Materialia, 2023 - Elsevier
The medium manganese steel with ultrahigh yield strength of 1421 MPa, a tensile strength
of 1575 MPa, and an excellent total elongation of 28.4% was designed by simple two-stage …
of 1575 MPa, and an excellent total elongation of 28.4% was designed by simple two-stage …
Effect of Intercritical Rolling on the Microstructure, Texture and Mechanical Properties of Dual Phase TWIP Steel
In the current research, deformed microstructures and mechanical properties were studied
for two dual phase TWIP steels (ie TWIP 1 and TWIP 2) subjected to intercritical rolling at …
for two dual phase TWIP steels (ie TWIP 1 and TWIP 2) subjected to intercritical rolling at …
Enhancing the properties of Al–Ni added medium Mn steel by tailoring B2–NiAl precipitates through aging treatment
In the present work, the effect of aging treatment and the role of precipitates in improving the
strength-ductility combination of intercritically annealed Fe–8Mn–4Al-3.5 Ni-0.6 Si-0.2 C …
strength-ductility combination of intercritically annealed Fe–8Mn–4Al-3.5 Ni-0.6 Si-0.2 C …
A Review of Recent Developments in Microstructures and Mechanical Properties of Medium Manganese Steels
S Yu, YG Deng - Journal of Materials Engineering and Performance, 2025 - Springer
Medium manganese (Mn) steels, noted for their cost efficiency and exceptional mechanical
properties, are particularly suitable for cutting-edge engineering applications. This study …
properties, are particularly suitable for cutting-edge engineering applications. This study …
Hot-rolled Al-added medium Mn steel (Fe-8Mn-2.85 Al-1Si-0.2 C): Microstructural evolution and tensile behavior
In this study, a low Al (< 3%) added medium manganese steel has been developed through
melting casting route in an open-air induction furnace. The cast steel ingot has been …
melting casting route in an open-air induction furnace. The cast steel ingot has been …
An analysis of microstructure and mechanical properties of ferritic stainless steel 430 during cold rolling and subsequent annealing
X Sun, L Ma, J Li, M Zhang, X Ma - The International Journal of Advanced …, 2022 - Springer
Systematic study on the microstructural evolution and mechanical properties of ferritic
stainless steel (FSS) 430 with different annealing processes was carried out in the present …
stainless steel (FSS) 430 with different annealing processes was carried out in the present …
Microstructure Evolution and Mechanical Properties of Ferrite–Austenite Duplex Fe-Mn-Al-(Cu)-C Steel under Different Annealing Temperatures
X Yan, Y Wu, M Zhang, S Liu, L Sun, Y Feng - Materials, 2022 - mdpi.com
The effect of Cu addition and the intercritical annealing (IA) temperature on the
microstructural evolution and mechanical properties of Fe-0.4 C-7Mn-4Al (wt%) was …
microstructural evolution and mechanical properties of Fe-0.4 C-7Mn-4Al (wt%) was …
[HTML][HTML] Partially recrystallized triplex-phase medium Mn steel strengthened by B2 precipitates
JY Kim, JS Kim, T Song, JK Kim - journal of materials research and …, 2023 - Elsevier
We report the annealing time-dependent microstructure–mechanical properties relationship
of cold-rolled and annealed Fe–6Mn-0.05 C–3Ni-1.5 Al (wt.%) steel, containing Ni and Al to …
of cold-rolled and annealed Fe–6Mn-0.05 C–3Ni-1.5 Al (wt.%) steel, containing Ni and Al to …