Laminated FRP composites' weak out-of-plane mechanical performance prevents their
usage in structural applications where homogeneous load bearing qualities are required. In …

This study embedded graphene nanoplatelet (GNP), nano-sized aluminum and copper in
epoxy-reinforced woven glass fiber. The 0.5 wt% nanofillers were incorporated into epoxy …

Delamination is one of the life‐limiting failure modes for fiber reinforced polymer (FRP)
composite composites resulting in poor damage tolerance, as this failure mode occurs at …

Bioinspired composites exhibit well-defined microstructures, where anisotropic ceramic
particles are assembled and bonded by an organic matrix. However, it is difficult to fabricate …

Abstract Alumina (Al2O3)-based polymer composites are used in various engineering
applications, such as the automotive and aviation sectors, where it is very important to …

MXene, a 2D transition metal carbide and nitride with graphene-like layered structures, has
become one of the preferred choice for nano-reinforcement in polymer matrix composites in …

Composite components' fabrication generates vast amounts of fiber wastes. This research
suggests using short carbon fibers (SCFs) as secondary reinforcement in glass fiber …

To address the challenges of high brittleness and poor crystallization capability in polylactic
acid (PLA), glass fiber (GF), and polycaprolactone (PCL) were selected as reinforcing and …

The inferior delamination resistance and out‐of‐plane performance of fiber metal laminates
(FMLs) are of serious concerns. This work employs two modification methods, namely metal …

In this work, a new type of epoxy foam‐filled 3D woven spacer composites (FF‐3DWSCs)
was designed and manufactured by self‐made 3D loom and foaming technology. The low …