In this work, the mechanical properties and strengthening mechanisms induced by
microstructural evolution in a rheo-extruded 5087 alloy processed via accumulative …

Based on the compositional design concept, an Al–6 Mg–0.8 Mn (–0.2 Sc) alloy with a good
combination of strength and ductility was obtained by hot extrusion deformation with a large …

Nanofluid application as the working fluid is proposed as a way for improving the solar
system performance. In this study, a dish concentrator with a cylindrical cavity receiver was …

The effects of rare earth erbium (Er) additions (0, 0.3, 0.6 and 0.9 wt.%) on the microstructure
development and tensile properties of die-cast ADC12 aluminum alloy have been …

Recently, a structurally-simple but compositionally-complex FeNiCoMnCr high entropy alloy
was found to have excellent mechanical properties (eg, high strength and ductility). To …

The effect of Sc addition on microstructure and mechanical properties of as-cast Al–Mg
alloys was investigated based on optical microscopy (OM), scanning electron microscopy …

In this study, a novel high entropy alloy (HEA) of Cr x-FeNiCu 0.5 Ti 0.5 (in mole ratio, x= 0,
0.3, 0.5, 0.7, 0.9 and 1.2) was designed and prepared by arc melting to investigate its …

3.7 mm thick cold-rolled Al–Mg–Er alloy plates were friction stir welded (FSW) under rotation
rates of 400–1200rpm and welding speeds of 100–400mm/min. The influence of tool …

In the present study, a textbook binary model alloy Al-3Cu (wt.%) was chosen as base alloy
and micro-alloying effect with different Er and Zr contents was examined. A two-steps …

The effects of homogenization treatments on the microstructure evolution, microhardness
and electrical conductivity of two dilute Al-Sc-Zr-Er alloys with different Zr contents were …