Turnitin
降AI改写
早检测系统
早降重系统
Turnitin-UK版
万方检测-期刊版
维普编辑部版
Grammarly检测
Paperpass检测
checkpass检测
PaperYY检测
[HTML][HTML] Dental implants: modern materials and methods of their surface modification
C Sotova, O Yanushevich, N Kriheli, S Grigoriev… - Materials, 2023 - mdpi.com
The development of dental implantology is based on the detailed study of the interaction of
implants with the surrounding tissues and methods of osteogenesis stimulation around …
implants with the surrounding tissues and methods of osteogenesis stimulation around …
Fabrication of titanium-based alloys with bioactive surface oxide layer as biomedical implants: Opportunity and challenges
MRSN Hazwani, LX Lim, Z Lockman… - … of Nonferrous Metals …, 2022 - Elsevier
Titanium and its alloys have long been used as implant materials due to their outstanding
mechanical properties and apparent biocompatibility. Despite this, the search for better …
mechanical properties and apparent biocompatibility. Despite this, the search for better …
Investigation of microstructure and mechanical properties of microwave consolidated TiMgSr alloy prepared by high energy ball milling
Abstract The nanostructured TiMgSr (at.% 70: 10: 20) was synthesized by ball milling
process followed by cold compaction and microwave sintering. XRD results after 30 h milling …
process followed by cold compaction and microwave sintering. XRD results after 30 h milling …
[HTML][HTML] Laser powder bed fusion of Alumina/Fe–Ni ceramic matrix particulate composites impregnated with a polymeric resin
Additive Manufacturing (AM) plays a key role in meeting the vital demands of Industry. The
AM industry needs the range of applicable materials to be expanded by conducting research …
AM industry needs the range of applicable materials to be expanded by conducting research …
[HTML][HTML] Design and processing of near-β Ti–Nb–Ag alloy with low elastic modulus and enhanced corrosion resistance for orthopedic implants
This research aims to design and process a low elastic modulus near-β Ti–30Nb–3Ag
at%(TNA) alloy with enhanced corrosion and antibacterial characteristics for bioimplant …
at%(TNA) alloy with enhanced corrosion and antibacterial characteristics for bioimplant …
Simultaneously improving the strength and ductility of the as-sintered (TiB+ La2O3)/Ti composites by in-situ planting ultra-fine networks into the composite powder
S Li, X Wang, Z Wei, Y Han, H Shi, J Le, G Huang… - Scripta Materialia, 2022 - Elsevier
This study creatively proposed a technique to effectively overcome the strength-ductility
mismatch of the as-sintered titanium matrix composites by in-situ planting TiB nano-fibers …
mismatch of the as-sintered titanium matrix composites by in-situ planting TiB nano-fibers …
[HTML][HTML] Synthesis and characterization of multi-walled carbon nanotube-reinforced Ti–Mg alloy prepared by mechanical alloying and microwave sintering
Abstract Titanium-magnesium (Ti–Mg) alloy is a widely accepted bimetallic material suitable
for biomedical applications. However, reduced wear and corrosion resistance, low strength …
for biomedical applications. However, reduced wear and corrosion resistance, low strength …
[HTML][HTML] Effects of Mo equivalent on the phase constituent, microstructure and compressive mechanical properties of Ti–Nb–Mo–Ta alloys prepared by powder …
H Li, Q Cai, S Li, H Xu - Journal of Materials Research and Technology, 2022 - Elsevier
Abstract The Ti-(0–30) Nb-(2–11) Mo-3.5 Ta (wt.%) alloys with the composition interval of 5.0
wt.% for Nb and 3.0 wt.% for Mo were prepared by hot isostatic pressing. The Ti–Nb–Mo–Ta …
wt.% for Nb and 3.0 wt.% for Mo were prepared by hot isostatic pressing. The Ti–Nb–Mo–Ta …
[HTML][HTML] Development of high strength and lightweight Ti6Al4V5Cr alloy: microstructure and mechanical characteristics
This article explains development of high strength and lightweight Ti6Al4V5Cr alloy by μ-
plasma powder additive manufacturing (μ-PPAM) process for automotive, aerospace …
plasma powder additive manufacturing (μ-PPAM) process for automotive, aerospace …
Thermo-mechanical simulation of ultrahigh temperature ceramic composites as alternative materials for gas turbine stator blades
The efficiency of the Bryton cycle strongly depends on the maximum temperature of the
cycle. However, restrictions on metallurgical problems deprive engineers from the benefit of …
cycle. However, restrictions on metallurgical problems deprive engineers from the benefit of …