Fabrication of TiZrNbTaFeN high-entropy alloys coatings by HiPIMS: Effect of nitrogen flow rate on the microstructural development, mechanical and tribological …

SK Bachani, CJ Wang, BS Lou, LC Chang… - Journal of Alloys and …, 2021‏ - Elsevier
Abstract One TiZrNbTaFe and five (TiZrNbTaFe) N high entropy alloy coatings were
deposited onto three different substrates using a high power impulse magnetron sputtering …

Microstructure and wear behavior of (ZrTaNb) C/N quaternary ceramic coatings prepared by double-cathode glow plasma surface alloying on titanium alloy

H Yu, W Liang, Q Miao, M Yin, H Chen, W Yao, Y Sun… - Wear, 2023‏ - Elsevier
Multi-principal component coating is a new type of surface protection material developed in
recent years. To improve the surface hardness and wear resistance of aviation titanium …

[HTML][HTML] Microstructure and mechanical, electrical, and electrochemical properties of sputter-deposited multicomponent (TiNbZrTa) Nx coatings

R Shu, EM Paschalidou, SG Rao, J Lu… - Surface and Coatings …, 2020‏ - Elsevier
A series of (TiNbZrTa) N x coatings with a thickness of~ 1.1 μm were deposited using
reactive magnetron sputtering with segmented targets. The deposition temperature was …

[HTML][HTML] Development of Multicomponent Nanostructured Nitride Coatings to Protect against Corrosion Products from Titanium Alloy

A Vereschaka, N Cherenda, C Sotova, V Uglov… - Coatings, 2023‏ - mdpi.com
Phase-structural characteristics and the corrosion resistance of coatings ZrN,(Zr, Ti) N,(Zr,
Hf) N,(Zr, Nb) N,(Ti, Zr, Hf) N and (Ti, Zr, Nb) N, which were deposited on a Ti6Al-4V titanium …

Hard and wear-resistant niobium, molybdenum carbide layered coatings on WC-Co tools produced by ion bombardment and cathodic vacuum arc deposition

AK Kuleshov, VV Uglov, DP Rusalsky - Surface and Coatings Technology, 2020‏ - Elsevier
Phase and element composition, microhardness, adhesive strength, wear resistance and
microstructure of the coatings and underlying layers formed on WC-Co hard alloy using Nb …

Investigation of the properties of Ti-TiN-(Ti, Al, Nb, Zr) N composite coating and its efficiency in increasing wear resistance of metal cutting tools

S Grigoriev, A Vereschaka, F Milovich… - Surface and Coatings …, 2021‏ - Elsevier
The paper investigates the structure and the elemental and phase composition of Ti-TiN-(Ti,
Al, Nb, Zr) N coatings, deposited using Filtered Cathodic Vacuum Arc Deposition (FCVAD) …

Comparison of properties of the ZrN mononitride coating and (Zr+ Ti–B–Si–Ni) N multicomponent coating obtained by vacuum-Arc plasma-assisted deposition

AA Leonov, VM Savostikov, VV Denisov… - Journal of Surface …, 2023‏ - Springer
The paper presents the results of comparative study of the mechanical properties and heat
resistance of a zirconium nitride mononitride coating and a multicomponent coating …

Relationship between the coefficient of friction of the coating and the intensity of the cutting tool wear in steel turning

S Grigoriev, A Vereschaka, F Milovich… - AIP Conference …, 2024‏ - pubs.aip.org
The change in the adhesive component of the friction coefficient (fadh) of the Ti-TiN-(Ti, Al,
Nb, Zr) N coating at temperatures from 500 to 1000 C was studied. The relationship between …

Features of the microstructure of multilayered (TiAlSiY) N/MoN coatings prepared by CA-PVD and their influence on mechanical properties

O Maksakova, AD Pogrebnjak, O Bondar… - … and Properties of Micro …, 2020‏ - Springer
Thin nanolayered coatings composed of the consequent alternation of multi-element
(TiAlSiY) N and binary MoN layers were deposited by the cathodic arc deposition. The …

Cathodic Vacuum ARC Multilayer Coatings (TiZrSiY) N/NbN: Structure and Properties Depending on The Deposition Interval of Alternate Layers

VM Beresnev, SV Lytovchenko… - … Journal of Physics, 2023‏ - periodicals.karazin.ua
Two series of multilayer coatings with different numbers of bilayers (268 and 536,
respectively) were synthesised using the cathodic vacuum-arc deposition (CVAD) with the …