We report additive manufacturing (AM) of a nickel superalloy metallic matrix composite (Ni-
MMC) using laser powder bed fusion (LPBF). Nanoceramic-containing composite powders …

The main aim of this research work is to investigate the effects of building directions and
raster orientations on the creep behavior of 3D-printed plastic material and to develop …

The present study conducts a comprehensive study on heat-treatment-induced cracking of
Inconel 738 (IN738) alloy fabricated by laser powder bed fusion (LPBF) using scanning …

In this research, the hot corrosion behavior of laser deposited Inconel 718 alloy under
different heat treatment conditions (solution plus aging, direct aging and as-deposited) is …

In this paper, the creep behavior of Polymethyl Methacrylate (PMMA) is investigated both
experimentally and numerically at different temperatures (30, 40 and 50° C) and stress …

Hot corrosion is one of the crucial failure modes of Ni-based superalloy components
operating at high temperatures, which inevitably affects the subsequent mechanical …

Unlike metal pipes, high density polyethylene (HDPE) pipes are not susceptible to erosion
and corrosion. However, the most important mechanical feature of the HDPE pipes is that …

The most important feature of the polymeric pipes is that they creep even at room
temperature. Therefore, investigating the creep behavior of the polymers and their welded …

In this paper, the mechanical behavior of single strap joints was investigated under tensile
loading. Four sets of specimens were fabricated eg, adhesively bonded, friction stir spot …

Most of the mechanical components are exposed to environmental attacks and different
loading conditions, eg, internal pressure, high-temperature gradient, and angular velocity …