Electrochemical discharge machining (ECDM) is a hybrid non-conventional machining
process, used to machine electrically conductive and non-conductive materials. It is a …

Electrochemical discharge machining has been proved to be efficient micro-machining
process and significantly used for the machining of non-conductive materials. The …

Electrochemical discharge machining (ECDM) is an emerging non-traditional machining
process that involves high-temperature melting assisted by accelerated chemical etching. In …

Electrochemical discharge machining (ECDM) is a hybrid machining process capable of
micromachining conductive and nonconductive materials. The recent development and …

Since the microchannels have a vital role in microelectromechanical systems (MEMS),
microfluidic and lab-on-a-chip devices, the surface quality, material removal rate (MRR), and …

Electrochemical discharge machining (ECDM), also known as spark assisted chemical
engraving (SACE), is an effective micro-machining process for non-conducting materials …

Continuous demands to develop advanced radio-frequency transmission at higher
frequencies have initiated glass-based materials as a substrate in radio-frequency micro …

Introduction With the rapid development of MEMS, the demand for non-conductive hard and
brittle material microstructure is increasing. Electrochemical Discharge Machining (ECDM) is …

Abstract Formation of macro-sized (> 3 mm) through-holes in a 1.1 mm glass substrate by
using a novel tubular electrode having notches in electrochemical discharge machining …

An experimental investigation comparing the effect of tool electrode materials on the
formation of microholes in glass by the pulse electrochemical discharge machining is …