This article reviews existing methods for the characterisation of mixing and flow in
microchannels, micromixers and microreactors. In particular, it analyses the current …

Direct numerical simulation (DNS) and large-eddy simulation (LES) are carried out to
investigate the frequency effect of zero-net-mass-flux forcing (synthetic jet) on a generic …

The separated flow over a cylinder elongated by another cylinder of a smaller diameter is
investigated numerically at the high subsonic regime using zonal detached eddy simulation …

Highly resolved large-eddy simulation (LES) is used to investigate the characteristics of a
canonical boundary layer separating from a curved step in a channel of height 8.5 times that …

The transition mechanism and unsteady behavior behind a backward-facing step (BFS) in
the supersonic regime at Ma= 1.7 and Re δ 0= 13 718 is investigated using large-eddy …

This study presents the effects of the orifice to pipe diameter ratio (defined as the β ratio) on
the flow field behind a thin circular square-edged orifice plate. We adopted a planar particle …

The backward-facing step flow is investigated experimentally and numerically at moderate
Reynolds numbers. Different channel expansion ratios (ER= 1.43, 2, 2.5, and 4) and inlet …

In this paper, we use a planar particle image velocimetry system to measure the flow field
downstream of a circular square-edged orifice plate in a round pipe. The flow field is a fully …

The mean and fluctuation flow patterns and heat transfer in a turbulent droplet-laden dilute
flow behind a two-dimensional single-side backward-facing step are numerically studied …

The purpose of this work was to predict the outcome of a practical cleaning test for closed
food‐process equipment by examining wall shear stress distributions in the equipment …