In this study, the effects of the addition of Ti powder and T6 heat treatment on the
microstructure and the mechanical properties of A356-based composite containing 0.5, 1.5 …

Recent studies demonstrate that Al-Si alloys, which are conventionally used in as-cast form,
can be transformed to profiles through high temperature plastic deformation. However, rare …

Copper containing antibacterial stainless steel in the wide application process, will face a
variety of working conditions, thus inevitably exposed to a variety of different environmental …

In this study, hypoeutectic and eutectic Al–Si alloys were processed through rolling and
friction stir processing (FSP), and the effects of deformation routes on the microstructures …

Abstract SHIMADZU AGS-100KN universal testing machine was used to carry out tensile
experiments of 2.2%, 5%, 10%, 15%, 20% and 25% of different tensile elongations on 5052 …

High–strain–rate deformation of steels is prone to generating localized adiabatic shear
bands (ASB) due to strain localization, leading to plastic instability and fracture …

The impact of Mg on the solidification structure of hypereutectic Al–Si alloys with different Si
contents (15 wt% and 18 wt%) was investigated. 3% Mg was added to Al–15Si alloy to …

This investigation addresses the effects of peening duration during SP on surface properties
of AA2017 alloy. SP performed with different durations (0, 70, 140 and 210 s) and imparts …

The dynamic compression property of maraging steel is an important basis for determining
the impact resistance of the structure, and the related studies are few. To enrich the relevant …

Powder bed fusion (PBF), along with subsequent heat treatment, plays a crucial role in
enhancing the impact toughness of FeCoNiCrMo 0.2 high-entropy alloys (HEAs) and …