Metal additive manufacturing (AM), also known as 3D printing, is a disruptive manufacturing
technology in which complex engineering parts are produced in a layer-by-layer manner …

Additive manufacturing (AM) is rapidly growing owing to its high design freedom, better buy-
to-fly ratios, and reduced fabrication time. The notable advantages and technological …

Components produced by additive manufacturing (AM) via direct metal laser sintering
(DMLS) have typical as-fabricated surface defects. As a result, surface properties of AM …

The current study intended to manufacture 17-4PH stainless steel using material extrusion
additive manufacturing (MEAM) process and to control the microstructure and mechanical …

The energy density distribution directly affects the molten-pool temperature gradient, cooling
and solidification rate of additive manufacturing (AM), which in turn affects the mechanical …

Abstract The 17–4 Precipitation Hardening Stainless Steel (PH SS) manufactured by
Selective Laser Melting (SLM) has wide application perspectives, but they are limited due to …

Carbon nanotube (CNT) reinforced 316L stainless steel (SS) composites were fabricated by
laser powder bed fusion (LPBF) additive manufacturing (AM). This study focuses on …

The intention of the present study is to investigate the effect of laser energy density on the
microstructure, post-heat treatment response, and wear properties of additively …

The scratch and reciprocating sliding wear response of a PH 13-8Mo stainless steel
fabricated by wire arc additive manufacturing (WAAM) are investigated after different cycles …

This research investigates the impact of heat treatment on the microstructure, hardness, and
corrosion resistance of 17-4 PH SS (stainless steel) processed by Selective Laser …