Abstract Alloys of the Fe–Cr–C–B–Ti alloy system are characterized by brittleness, which
can be eliminated by the copper alloy, while corrosion resistance and abrasive wear …

In the conditions of an energy crisis, an important issue is the increase in energy efficiency
and productivity of welding and hardfacing processes. The article substantiates the …

Deformation‐induced mechanisms, namely, transformation‐induced plasticity (TRIP) and
twinning‐induced plasticity (TWIP), are primarily responsible for improved tensile properties …

Continuous cooling transformation (CCT) diagrams represent roadmaps for producing all
heat-treatable steels. CCT curves provide valuable information on the solid-state phase …

This review is focused on the perspectives of the application of Advanced High Strength
Steels (AHSSs) in the field of additive technologies directed at the laser powder bed …

Strengthening Mg alloys with rare earth elements has been a research focus for several
decades. To minimize the usage of rare earth elements while enhancing mechanical …

Ultra-high-strength quenching and partitioning (Q&P) steels have achieved remarkable
lightweight effect in automotive manufacture due to the excellent mechanical performances …

The continuous cooling tnsformation of deformed austenite and relationship to mechanical
properties in medium-Mn steel was investigated by combining thermomechanical controlled …

This study reports the effect of different cooling practices after hot rolling on the
microstructure and mechanical properties of intercritically annealed quench and partitioned …

The present work simplifies the previous room-temperature quenching and partitioning (RT
Q&P) process down to a single furnace cooling process, delivering a medium Mn steel with …