The microstructural characteristics of the explosive welded niobium-steel interface were
systematically investigated by various characterizations and a two-step numerical …

Dissimilar joining of copper (C10300) to AISI–304 Stainless Steel (SS) sheets was
performed using Electron Beam Welding (EBW) process. EBW was performed for two weld …

Electron beam welding of Nb/GH3128 dissimilar alloys was conducted to obtain crack-free
joints. The beam offset process contributed to the improvement of microstructure, and …

This study involves investigation of metallurgical and mechanical properties of C-103
niobium alloy welded by electron beam. ICP, XRD and EDS method were used to determine …

The butt welding of Ta and GH3128 plates of 1.5 mm thick by using electron beam is
conducted. The effects of the beam offset on the microstructure, defects, mechanical …

During welding without beam deflection, the weld zone primarily consists of columnar
crystals. A reaction layer is detected along the fusion line on the molybdenum side, which is …

Niobium and vanadium have high metallurgical compatibility with titanium and therefore can
be used as inserts to avoid the accumulation of brittle intermetallic phases such as Fe 2 Ti …

A new design of electron beam gun for welding in open space has been developed. The
gun design is based on the application of triode emission system with improved quality of …

Formability study on welded blanks of Nb-based refractory alloy C-103 (Nb-10Hf-1Ti (wt.%))
has tremendous potential for utilizing smaller sheets for realization of large-size divergent …

A brittle reaction interface in molybdenum/Kovar joint acquired by electron beam welding-
brazing, which consisted of three zones, was concretely analyzed with respect to …