Heterostructured (HS) materials, characterized by heterogeneous zones with differences in
mechanical or physical properties, represent a revolutionary advancement in material …

Austenite stability is essentially important in improving the cryogenic toughness of cryogenic
Ni steels and guiding the development of Ni-saving cryogenic steels. The austenite stability …

As a challenge to avoid the strength-toughness trade-off for high-strength steel, strength and
toughness are contradictory, especially at low temperatures. This study proposed a new …

Here we show that cold rolling decreased the brittle-to-ductile transitions (BDT) temperature
of tungsten (W). Furthermore, we show that the BDT temperature correlates with the grain …

The orientation dependence of Charpy toughness has been investigated in API-X80
linepipe steel. The occurrence of delamination and preferential alignment of {100} cleavage …

The fracture toughness of extruded Mg-1Zn-2Y (at.%) alloys, featuring a multimodal
microstructure containing fine dynamically recrystallized (DRXed) grains with random …

The aim of this research is to examine the effect of roughing and finishing reductions on
crystallographic texture. Three rolling conditions were applied with the same total reduction …

The knowledge of the fracture of bulk metallic materials developed in the last 50 years is
mostly based on materials having grain sizes, d, in the range of some micrometres up to …

Strength and toughness are a couple of paradox as similar as strength-ductility trade-off in
homogenous materials, body-centered-cubic steels in particular. Here we report a simple …

In this study, the microstructure dependence of impact toughness was studied for a 2205
duplex stainless steel in the temperature range of− 196 to 25° C. Three markedly different …